Copper Connectivity

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Yellow Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

Twisted pair cable, primarily for use in telephone systems.

• Can use 3.5mm, 4.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

5m, 4 wire Rj45 - RJ11 Lead

• 5m lead
• RJ45 - RJ11 plug
• 4 wire

This is manufactured from high specification twisted pair 4 pair shielded Cat 6A Cable designed for maximum single integrity and optimum performance. Cat6A is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 500Mhz as specified within BS EN 50713-1

• 100Mbit/s and 1000Base-t Gigabit Ethernet networks
• PC and Multimedia networking
• Patch Panel and Wall sockets
• Telecom and Broadband applications
• Power over Ethernet
• 10G Networks

Solid conductor 2 core twisted pair cable, specifically for use with Krone terminal strips.

• 500m per roll

This inline socket can be terminated in a couple of minutes with a high quality connection. Meets all performance requirements for an RJ45 socket up to Category 6. Termination is by way of industry standard IDC’s so that a standard tool can be used. The socket assembly is packaged in a convenient and compact snap-together housing. Straightforward termination for production lines or in the field. High performance extension leads and adaptors can be made quickly and at a competitive cost.

• Category 6 ANSI/TIA-568-B.2-1 performance at component level
• Industry standard IDC termination
• Integral compact housing (22x27x42mm plus grommet)
• Excellent cable retention by way of cable tie supplied
• Flexible PVC grommet for strain relief
• Supplied with instruction leaflet for standard wiring versions
• Patent pending in UK and rest of Europe
• Weight: 18g approx
• ABS housing
• Plating: PD20µ/0.5µm + gold 0.8 µ/0.02µm
• Suitable for 23-26 AWG/ 0.405-0.573 mm solid or stranded cable
• white (UTP)

This inline socket can be terminated in a couple of minutes with a high quality connection. Meets all performance requirements for an RJ45 socket up to Category 6. Termination is by way of industry standard IDC’s so that a standard tool can be used. The socket assembly is packaged in a convenient and compact snap-together housing. Straightforward termination for production lines or in the field. High performance extension leads and adaptors can be made quickly and at a competitive cost.

• Category 6 ANSI/TIA-568-B.2-1 performance at component level
• Industry standard IDC termination
• Integral compact housing (22x27x42mm plus grommet)
• Excellent cable retention by way of cable tie supplied
• Flexible PVC grommet for strain relief
• Supplied with instruction leaflet for standard wiring versions
• Patent pending in UK and rest of Europe
• Weight: 18g approx
• ABS housing
• Plating: PD20µ/0.5µm + gold 0.8 µ/0.02µm
• Suitable for 23-26 AWG/ 0.405-0.573 mm solid or stranded cable
• black (UTP)

Plastic, surface-mounting double back box.

• Double-gang
• For use with face plates 146mm x 86mm
• 45mm Deep
• Cable Entry knockouts on side and base

SVGA ( Super Video Graphics Array ) is a term that covers the area of computer display standards. Supplied in a dongle form and in Euro module format.

• Fits 25x50mm aperture for use with Modular faceplate system
• SVGA female to SVGA female
• length Around 165mm approx
• White Finish

These female to female keystone couplers with their standardised dimensions can be used for easy snap-in mounting in a keystone\npatch panel, faceplate or surface-mount box.\n\nThe compact design allows fitting 24 keystone couplers in a 1U keystone patch panel.

• Designed to fit industry standard keystone outlets and patch panels
• Connections: female to female
• Keystone housing: ABS UL94V-0

US type telephone plugs available in various different formats.

• Pack of 100

Plug 6-POS 4CON 100s.

• Plug 6-POS 4CON 100s

CW1308B twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308B twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308B twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

As used on headphones and earphones and other Audio Visual applications such as microphone , older Laptops and computer sound cards.

• Fits 25x50mm aperture for use with Kauden Modular faceplate system
• Standard 3.5 mm Stereo jack socket
• Solder connections
• White finish

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308B twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

25 Port Voice Panel (FFv25)

• 25 way 1U high density format
• 6 vertical IDC connectors per RJ45
• LSA+ type IDC connectors
• Multiple cable mounting lugs
• Supplied with cage nut set
• Gold plating on RJ45 contacts

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

A comprehensive kit required for overhead cabling, comprising of:

• 50M Length 3.0mm Catenary Cable
• 8.0mm Tad Hook/Eye (Turnbuckle)
• 1 Closed 50mm Hook Plate
• 1 Open 50mm Hook Plate
• 4 3mm Wire Grips
• 2 3mm Wire Thimbles

Flush Strain Relief Boots

• Compact design, suitable for high density use in switches, hubs etc.
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS1
• ) and 6.5mm (PS6
• )
• Available in a range of colours and transparent

Flush Strain Relief Boots

• Compact design, suitable for high density use in switches, hubs etc.
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS1
• ) and 6.5mm (PS6
• )
• Available in a range of colours and transparent

Flush Strain Relief Boots

• Compact design, suitable for high density use in switches, hubs etc.
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS1
• ) and 6.5mm (PS6
• )
• Available in a range of colours and transparent

Flush Strain Relief Boots

• Compact design, suitable for high density use in switches, hubs etc.
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS1
• ) and 6.5mm (PS6
• )
• Available in a range of colours and transparent

Strain Relief Over Boots

• Designed to minimise excessive strain on the connection
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS2*)
• White

Strain Relief Over Boots

• Designed to minimise excessive strain on the connection
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS2*)
• Grey

Strain Relief Over Boots

• Designed to minimise excessive strain on the connection
• Extended hood prevents latch snagging other cables
• Suitable for cable diameter size: approx 5.5mm (PS2*)
• Black
• 100

RG 59 - c/u version has plain copper 1/0.58mm diameter centre conductor, solid dielectric, plain copper braid screen to Mil C-17, pvc outer sheath. RG 59 c/u PE is suitable for external use, including direct burial in suitably prepared ground and the LSF version is the low smoke and fume internal cable.

• RG59c/u LSF
• Black
• 100 metres

RG59a/u + 2 cores, shotgun style,LSF 100 metres C 244B1\n2 x 0.75mm cores, black LSF sheath

• RG59a/u
• 2 cores
• Shotgun style
• LSF 100 metres C 244B1
• Black LSF sheath

BNC 75 ohm male crimp, for RG59 (all versions)

• BNC 75 ohm
• Male crimp
• For RG59 (all versions)

BNC 75 ohm female crimp, for RG59 (all versions)

• BNC
• 75 ohm
• Female crimp
• For RG59 (all versions)

BNC T piece adaptor, female/male/female

• Quality BNC connectors for use with co-axial cables

BNC F piece adaptor, female/male/female

• Quality BNC connectors for use with co-axial cables

BNC Y piece adaptor, female/male/female

• Quality BNC connectors for use with co-axial cables

Strain relief boot for RG59, black

• Cable boot for BNC connector RG59
• Black

Strain relief boot for RG59, red

• Cable boot for BNC connector RG59
• Red

BNC male - BNC male flylead, booted, 0.5 metre

• Booted
• 0.5 metre

BNC male - BNC male flylead, booted, 1.0 metre

• Booted
• 1 metre

BNC male - BNC male flylead, booted, 2.0 metre

• Booted
• 2 metre

Standard cable for internal voice applications \nCW1308 LSZH sheath internal cable\nIncludes 1.38mm solid copper earth-wire\n0.5mm Copper conductor communication cables

• 50 Pair Cable
• White
• Per Metre

All data modules incorporate standard IDC connecters

• Label Window
• 25 x 50mm

• 12.5 x 50mm

• 86 x 140mm

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Grey Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This small and lightweight BT to RJ11 connector is a compact solution that has been made to facilitate telephone communication in certain homes or offices. RJ11 is a physical interface that's commonly used for terminating telephone wires. Ideal for phone lines, fax machines and dial up modems.

• BT plug (male) to RJ 11 wall socket

BT socket to RJ45 plug secondary

• BT socket to RJ45 plug

10 Meter, 6 way extension plug and socket

• 6 way

HDMI Extender up to 60m Cat-5E/ Cat-6 with IR Passback

• Support HDMI 1.4a
• Support 3D
• Support highest video resolution 1080p/60Hz
• Support 1.65Gbps data rate and TMDS clock up to 165MHz
• Support 8/10/12 bit deep colour
• Support AWG26 HDMI standard cable, input up to 15 metres, output up to 20 metres
• Signal transmission: By using single cat-5e or cat-6(recommended) cable instead of HDMI cable, it can extend the distance up to 50 metres between TX and RX.
• No loss of quality
• Install in minutes
• Need DC5V/1A power supply

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Green Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6