Copper Connectivity

Electrical noise and interference picked up by extension wiring and other sources in the home or office are known to effect the ADSL/Broadband signal by suppressiong the line speed and causing unexpected glitches and line interruptions. Special RFI electronic circuitry embedded in the Enhancer Plate helps prevent these problems. Fitting in to an existing NTE5 type telephone socket commonly used in millions of homes the Enhancer plate offers a potentially faster and more reliable service for the higher bandwidth applications now being used.

• Ideal for home broadband installations

Cat 6 modular RJ45 plugs

• Cat 6 RJ45 crimp plugs supplied in packs of 100

RJ11 Line Cord for use with Optipoint Range of system phones

• For use with the optiPoint range of system phones

This black 2 pair unbranded dropwire cabling is commonly used for exterior overhead distribution cabling and totals 250m in length. The CW1378 cable incorporates 3 strain wires which consists of brass coated steel wire to ensure it is strong and doesn't sag when stretching over large open spaces

• CW1378 no.10B dropwire
• Brass coated steel wire for strength
• Black wire
• 250m in length
• 2 pair wire
• Durable cable for external use

The NTE 5A is designed to terminate single copper pair lines in the customer premise.\nIt is the accepted within the UK by all network operators that the NTE5A is the preferred method of terminating single pair copper lines within the customer premise.

• Plastics moulded from V0 rated PVC
• 2 way IDC connection of incoming network operator’s wiring (LSA style)
• Standard linetest and ringing components provided
• 26A Overvoltage protection included
• 401A Test socket to verify network wiring is good
• 601A socket for customer’s equipment connection
• 4 way IDC connector for onward distribution of customer’s wiring (LSA style)

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

High Quality Cat5e Snagless Patch Lead

• Blue
• 0.3m
• Cat5e
• Snagless

High Quality Cat5e Snagless Patch Lead

• Red
• 0.3m
• Cat5e
• Snagless

High Quality Cat5e Snagless Patch Lead

• Yellow
• 0.3m
• Cat5e
• Snagless

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 7.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

Dropwire cable number 14, 4 pair per meter.\n\n0.5mm, solid plain copper conductor, pvc insulated, polyethylene outer sheath. The cables incorporate steel strength members and are therefore self-supporting.

• 4 pair cable
• 0.5mm
• Solid plain copper conductor
• PVC insulated
• Polyethylene outer sheath

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

Play & play utilisation.

• Ideal where sufficient outlets are not available

High Quality Cat5e Snagless Patch Lead

• Black

High Quality Cat5e Snagless Patch Lead

• White
• 0.3m
• Cat5e
• Snagless

• Ideal where sufficient outlets are not available

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

Designed to accommodate 3 x 10 pair connectors. 2 in/outlet ports. Box can be secured using built-in lock.

• Dims: 217 x 134 x 92mm

6 Pair Cable.

• 200 metres in length

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

Overhead telephone distribution cable. this drowire 10B has 2 pairs and incorporates strain wires of yellow PVC insulated, brass coated steel stranded wire.

• Brass coated steel wire for strength
• Durable cable for external use
• CW1378 no.10B dropwire
• 2 Pair - Black & Green
• Price per metre

Overhead telephone distribution cables available in 2 or 3 pair versions. Both types incorporate 3 strain wires to support the weight of the cable. The strain wires are yellow PVC insulated, brass coated steel stranded wire. The overall jacket is black polyethylene with good abrasion and weather resistance.

• 500m

This small and lightweight BT to RJ11 connector is a compact solution that has been made to facilitate telephone communication in certain homes or offices. RJ11 is a physical interface that's commonly used for terminating telephone wires. Ideal for phone lines, fax machines and dial up modems. Can be used to connect a US style telephone line to a UK BT phone plug.

• Can be used to connect a US-style telephone line to a UK BT phone plug.

RJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

Overhead telephone distribution cables available in 2 or 3 pair versions. Both types incorporate 3 strain wires to support the weight of the cable. The strain wires are yellow PVC insulated, brass coated steel stranded wire. The overall jacket is black polyethylene with good abrasion and weather resistance.

• 100m

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

Enables 2 wire phones terminated with a RJ45 plug to be used on standard BT type sockets.

• RJ45 socket to BT 431A Plug

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable RJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable\nRJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable RJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable RJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable RJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

0.3m RJ45 Cat6 UTP LSZH Stranded snagless Network Cable\nRJ45 Network cables connect any network enabled device such as a PC, printer, scanner etc to a network allowing data to flow to and from each device. Digital phone systems can also be run via RJ45 Network cables, a system known as Voice Over IP (VOIP)

• RJ45 CAT 6: Transfers data at the speed of up to 1 Gigabit per second (Mbps), 250mhz frequency
• UTP: Short for unshielded twisted pair consists of two unshielded wires twisted around each other, our CAT 6 cables are 8 core with 4 pairs of twisted wire
• LSZH (LS0H): Short for low smoke zero halogen.
• The low smoke aspect means in the event of a fire the cables will melt rather than burn a clear smoke is emitted instead of a very dangerous black smoke.
• The Zero Halogen aspect means most network cables are made with plastic containing Chlorine. In a fire, a halogen-containing plastic material releases a poisonous gas that forms hydrochloric acid when it comes in contact with water. Chlorine -free cables do not produce dangerous gases or acids. This specification of cable would be required for environments such as Schools, Government buildings, MOD etc.
• 24AWG: Short for average wire gauge - relates to the thickness of the wires within the cable, the thicker the wires the more room for data to run through the cable. NOTE The thicker the wire the lower the AWG figure.
• Stranded: Stranded conductor form features multiple strands (7 strands within each core) of cable making the overall cable more flexible and easier to bend
• Flush Moulded Boot: Plastic is physically injected into the end of the connector ensuring both the boot and connector are the same size. Creating easier access for multiple network cables to be connected into a patch panel. Our design of boot makes it virtually impossible to break the RJ45 connector from the cable.
• Snagless: Snagless boots offer the clip protection from other cables getting caught underneath the clip and breaking it off. Our snagless design features wings rather than a hood which encases the clip. The advantage of our design means you still have easy access to the clip.
• Snagless Flush Moulded Boots: A major design feature of our cables, creates easier usability and ensures our cables are strong and robust.
• Strain Relief: A flexible moulded panel at the end of the boot protects the internal wires from any undue stresses or strains.
• Lifetime cable warranty

UTP RJ45 patch lead. Available in a variety of colours and sizes to suit its environment. All cables are fitted with flush moulded boots - meaning the shoulders of the cable are no wider than the connector so they will sit easily next to each other in a patch panel. The boot also stops damage to the cable when being removed from a patch panel as the wiring is no longer exposed.

• All our cables are RoHS Compliant

Jelly Crimp Connectors

• Pack contains 500 jelly crimps

For 3 pole over-voltage arrestors. Plugs into disconnection and connection modules,10 pair.\nFitted with clear cover and magazine can be fitted with strips designation.

CW1308 internal telephone cable - twisted multipair cable, 0.5mm diameter solid copper conductor, pvc insulated and pvc sheathed in white

• 25 Pair Cable
• White
• Per Metre

Titan Cat6a S/tp Cable 305m

• 305m Box
• Cat6a Cable
• S/TP

• Cat6 UTP Patch Leads provides optimum connectivity individually certified and tested to TIA standards
• Patch cords are available in 5 colours
• Lengths range from 1 Metre through to 15 metres

Introducing the Titan range of high quality Cat5e Cable that supports our existing range of modules and faceplates. All are produced to the highest standards that combine great value with high performance.

• 305m box
• 4 pair LSOH Cat5e Cable
• Orange

15m CAT6A Patch Lead Grey STP

• 10G Plus 27 AWG S-FTP stranded 4 Pair RJ45 Blade Patch Leads.
• LSOH IEC 332.1 Sheathed copper cable.
• Comes with grey boots.

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

• Min. insulation resistance 50MOhms at 20°C
• Min. conductor resistance 97.8Ohm/km at 20°C
• Max. unbalanced capacitance 500pF
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

50 way 1U high density format\nï‚· 6 vertical IDC connectors per RJ45\nï‚· LSA+ type IDC connectors\nï‚· Multiple cable mounting lugs\nï‚· Supplied with cage nut set\nï‚· Gold plating on RJ45 contacts

• Dimensions: 439 x 145.2 x 44 (mm)
• Materials: Constructed from mild steel with a black finish

Titan Cat5e Patch Lead 1m Green 24awg

• Cat5e
• Patch Lead
• 1m
• Green
• 24 AWG

Titan Cat5e Patch Lead 3m Yellow 24awg

• Cat5e
• Patch Lead
• 3m
• Yellow
• 24 AWG

Titan Cat5e Patch Lead 3m Green 24awg

• Cat5e
• Patch Lead
• 3m
• Green
• 24 AWG

Titan Cat5e Patch Lead 10m Black 24awg

• Cat5e
• Patch Lead
• 10m
• Black
• 24 AWG

Ready made connection box offering termination of cables in plastic housing with cable anchoring and cable entry requirements catered for.\n\nThis 100 pair connection box takes up to 10 x 10 pair modules.

• Takes up to 10x10 pair modules
• Offers larger capacity termination
• Quick-release screw lid
• Suitable for termination of cables and equipment tails on walls
• 320mm x 210mm x 120mm

Fully compliant with Category 5e standard requirements for a consolidation point. \nQuick release lid. \nRobust outer casing. \nSupplied with fixing screws and adhesive pad for optional mounting. \nIDC's - industry standard 'Krone LSA+' type.

• Outer casing: ABS
• Contacts: Nickel over copper
• Colour: White

Play & play utilisation.

• Ideal where sufficient outlets are not available

Play & play utilisation.

• Ideal where sufficient outlets are not available

Black Cat 6 Snap in fascia and coupler module

• 6C 37x22mm
• Fits the industry standard 6C (LJ6C)
• Black
• Thru Coupler (Socket to Socket)
• Cat.6

Black Cat6 IDC Module

• Cat6
• IDC Module
• Black

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Grey Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Grey Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Grey Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Red Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Red Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Blue Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Green Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Green Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Green Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Green Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Yellow Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6

This is manufactured from high specification twisted pair 4 pair copper cable designed for maximum single integrity and optimum performance.\n\nCat6 is a standard set to support data transmission over twisted pair high signal integrity cable at frequency up to 250Mhz as specified within BS EN 50713-1

• Yellow Colour
• Snagless Type
• 24 AWG Cable
• UTP
• CAT 6