Copper Connectivity

The jumper wire has 0.5mm pain annealed copper conductor and is manufactured to CW1109 specification. It is HT PVC insulated and is 500m long.

• 500m long

This telephone drop wire cable is the type of cable used for overhead distributions lines that span over open areas. For example drop wire cable is often used from telegraph poles to homes and business premises.

• Drop Wire Cable
• 100m Cable Roll
• 4 Pair
• Black Cable

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

Single gang (2 module) Euro faceplate in black

• Designed for all industry standard modules
• Compatible with standard size backboxes
• Black

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

High performance Category 5e through coupler panel offering exceptional value for money

• Mounts to any 19 inch rack, cabinet or wall bracket
• Fixed rear cable management
• Panel includes: 24 x Category 5e couplers preassembled into metal keystone panel, 4 sets of M6 black cage nuts

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.Twisted pair cable, primarily for use in telephone systems

• Can use 3.5mm & 4.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

Twisted pair cable, primarily for use in telephone systems.

• Can use 3.5mm & 4.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.Twisted pair cable, primarily for use in telephone systems.

• Can use 3.5mm & 4.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

Twisted pair cable, primarily for use in telephone systems

• Can use 6.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

Twisted pair cable, primarily for use in telephone systems

• Can use 7.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 7.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 5.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 3.5mm & 4.0mm cable clips
• Min. insulation resistance 50MOhms at 20C
• Min. conductor resistance 97.8Ohm/km at 20C
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 6.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 6.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable is 200m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 5.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 11.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Can use 11.0mm cable clips
• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

• Min. insulation resistance 50MOhms @ 20°C
• Min. conductor resistance 97.8Ohm/km @ 20°C
• Max. unbalanced capacitance 500pF
• Max. insulated conductor diameter 0.95mm
• Conductor diameter 0.5mm solid

3 Metre RJ45 To RJ11 Plug Lead

• Colour shown - White, also available in black

This CW1109 jumper wire is for use with Krone terminal strips. It features a solid conductor 2 core red and white twisted pair cable and is 200m in length.

• For use with Krone terminal strips
• Red / white wires
• Solid conductor 2 core twisted pair cable
• 200m in length

GP NiMH batteries have high energy density and deliver more than double the capacity of NiCd batteries of similar size. They are most suitable for sophisticated high drain applications, e.g. digital cameras, PDAs and palms.

• Supplied in a pack of 4
• NiMH batteries have no memory effect
• Up to 1000 cycles
• NiMH rechargeable batteries, 1.2V, 950mAh
• Size: AAA

This jumper wire has 0.5mm pain annealed copper conductor and is manufactured to CW1109 specification. It is HT PVC insulated and is 500m long.

66B Style Above Ground External Enclosure for use with Gel Filled Crimps\n\nOriginally designed for use with BT style block screw terminal 1A and 2A but now widely used to house Gel Filled Crimps on buildings where communications wires have to be joined externally .\nGel Crimps themselves offer a degree of protection against the elements but still need to be contained and this enclosure is ideal.

• Generally known as BT 66B in the trade and widely use by major Telephone Companies
• Used externally as an enclosure for 8A, 8B, UY2 and all similar Gel filled crimps
• 3 cable entry points with slide on lid and locating screw .
• Max Cable Diameter = 12mm
• Supplied with 3 cable clamps and fixing screws
• Made from grey UV stabilized ABS.
• Dimensions = 125x90x42mm
• This item is not IP Rated and is not suitable for mains cabling

Drop Wire Closures. Above Ground Closure for use with Gel Filled Crimps on Telecommunications networks\n\nWidely used on buildings where communications wires and drop wires have to be joined externally. Gel Crimps themselves offer a degree of protection against the elements but still need to be contained and this enclosure is ideal. It used extensively by Openreach and endorsed by them . Complies with BT Specification LN684 issue3 2005.

• Weatherproof, hinged and designed to accommodate 8A style and other Gel filled crimps
• Used to join/junction Drop wires and other Communications/ Telephone cables
• Ideal for Aerial and underground use, outside Plant, under eaves or on poles
• Options for 1, 2 or 3 cable entry points
• Product Dimensions – 150x36x24mm

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

Enabling the easy joining of two RJ45 terminated cables specified as CAT6 or any lower specification. The pin our below used on this item is the most common used for coupling Cables and Patch Cords.

• RJ45 – female to female – Pin 1 to Pin1 – For CAT6 Unscreened Twisted Pair Cable (UTP)
• CAT6 specifies performance characteristics for frequencies up to 250MHz
• UL94V0 flame retardant White colour plastic
• Ultra small size 30x15x17mm
• Backwards compatible with CAT5e

Enabling the easy joining of two RJ45 terminated cables specified as CAT6 or any lower specification. The pin our below used on this item is the most common used for coupling Cables and Patch Cords.

• RJ45 – female to female – Pin 1 to Pin1 – For CAT5e/CAT6 Screened Twisted Pair Cable (STP)
• CAT6 specifies performance characteristics for frequencies up to 250MHz
• UL94V0 flame retardant insert with shielded exterior
• Dimensions 31x16x18mm – Small and neat
• CAT6 is backwards compatible with CAT5e

10” Rack Mount 12 Port 1U CAT6 SOHO Patch Panel

• CAT6 performance and backwards compatible with CAT5e .
• Hi profile Krone type IDC terminals to prevent cable getting crushed by punch down tool.
• Color coded wiring diagram on rear of Panel
• Ideal for a small 4U and 8U SOHO cabinet
• Includes cable ties and cage nut kit

Designed for outdoor use on buildings and homes where ingress of water may be an issue. Enabling the joining of two RJ45 terminated external cables specified as CAT5E or CAT6.\n\nCAT6 specifies performance characteristics for frequencies up to 250MHz and backwards compatible with CAT5E\n\nPlease note: Some slight trimming on the patch cord boot maybe required to fit through the opening of this product

• Ideal for CCTV, Signage, Stadiums, POE Lighting, office buildings and all external situations
• Shielded design and so Ideal for Shielded or non-Shielded plugs with or without boots
• Extra space for different size plug boots and so will accommodate most plug designs
• Female to female coupling, can use on suitable pre-terminated Cords if required
• UL94V0 flame retardant plastic along with Anti-UV properties

0.5mm CW1109 Jumper Wire 1 PR

Titans Line Jack 2 Series consist of a surface mounted back box and face plate with single shuttered BT 601A jack socket.

• Line Jack 2 Series
• Manufactured in ABS material
• Supplied in packs of 20
• Surface mounted
• Single shuttered BT 601A jack socket
• Termination via 3 way BT 238A IDC connectors
• 67 x 67 x 29mm

The Titan 2 series PBX Master IDC line jack is supplied with backbox and fixing screws.

• Size: 68mm x 68mm x 29mm (with back box).
• PBX Master IDC

The Titan 2 series Secondary IDC line jack is supplied with backbox and fixing screws.

• Size: 68mm x 68mm x 29mm (with back box).

The Titan 3 series PSTN Master IDC line jack is supplied with fixing screws, with backboxes available separately.

• 86mm x 86mm
• Backboxes available separately
• PSTN Master IDC

The Titan3 Series - 85mm x 85mm single flush mounting socket is supplied with fixing screws.

• Flush mounted
• Supplied with fixing screws

The Austin Taylor 3 series Secondary IDC line jack is supplied with fixing screws, with backboxes available separately.

• Size: 86mm x 86mm.

Titans 4/1A Line Jack with IDC Terminal contains two independently electrically isolated circuits within the single housing and comes complete with two separate, fully shuttered BT 601A jack socket outlets. Also includes M3.5 fixing screws.

• Master SKT IDC
• Pressac 4 Series
• 85mm x 85mm double flush mounting socket
• Terminates 2 seperate circuits, supplied with fixing screws

Titan's 4/3A Line Jack with IDC Terminal contains two independently electrically isolated circuits within the single housing and comes complete with two separate, fully shuttered BT 601A jack socket outlets. Also includes M3.5 fixing screws.

• 2 independant circuits
• Comes with fixing screws

The Titan series PBX Master IDC line jack uses two separate circuits and is supplied with fixing screws, with backboxes available separately.

• Manufactured in white high gloss PVC material
• The line jack 4 series range from Pressac can be either flush or surface mounted. M3.5 fixing screws are supplied to surface mount to a Pressac moulded back box or to flush mount to a BS4662 back box).
• Termination is via 3 way BT 238A IDC connectors or screw terminals.
• Complete with 2 separate fully shuttered BT 601A jack socket outlets
• Provides 2 independent electrically isolated circuits contained in a single housing.

PIN1 - PIN1 (8-Way )

• Coupler, CAT5, 100MHZ (UT-250)
• Connector type A:RJ45
• Connector type B:RJ45
• Cable type:Cat5 RJ45 Coupler 8p8c pin 1 to pin 1 100MHz
• Colour: White

US type telephone plugs available in various different formats.

• Packs of 10

US type telephone plugs available in various different formats.

• Packs of 10

US type telephone plugs available in various different formats.

• US type (RJ11) telephone plugs
• Pack of 10

BT to RJ11 Adaptor

Makes identification of terminations easy, for mounting on a 10-pair LSA-PLUS module. No need to remove when using test plugs or inserting jumper wires. Labels can be ordered separately.

• Packs of 10

Right Hand BT Telephone Plug,

• Bagged in quantities of 25
• 6 wire

CW1308 twisted multipair internal phone cable is 100m long, 0.5mm in diameter, with a tin copper solid conductor and PVC insulated.

Cable intended for external use where protection against moisture is required, for example in ducts. Cable is constructed as follows; 0.5mm plain copper conductor, polyethylene insulated, twisted into pairs and laid up in unit construction. Cable is then petroleum jelly filled and over-sheathed in black polyethylene.

• 0.5mm plain copper conductor
• polyethylene insulated
• twisted into pairs and laid up in unit construction
• Cable is then petroleum jelly filled
• finally over-sheathed in black polyethylene.

Solid conductor 2 core twisted pair cable, specifically for use with Krone terminal strips.

• 2 core twisted pair
• For use with Krone terminal strips

Solid conductor 2 core twisted pair cable, specifically for use with Krone terminal strips.

• Blue/Yellow
• 500m length

20 Pair & Earth telephone Cable - 200m roll

• Can use 11.0mm cable clips
• Min. insulation resistance 50MOhms at 20°C
• Min. conductor resistance 97.8Ohm/km at 20°C
• Max. unbalanced capacitance 500pF
• Conductor diameter 0.5mm solid
• Max. insulated conductor diameter 0.95mm

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.+

• Twisted Multi pair
• 50 Pair & Earth
• PVC insulated

CW1308 twisted multipair internal phone cable with a tin copper solid conductor and PVC insulated.

• 100 Pair & Earth
• Multi Pair
• PVC Insulated

Overhead telephone distribution cables available in 2 or 3 pair versions. Both types incorporate 3 strain wires to support the weight of the cable. The strain wires are yellow PVC insulated, brass coated steel stranded wire. The overall jacket is black polyethylene with good abrasion and weather resistance.

• 2 pair
• 3 Strain Wires
• Yellow PVC insulated
• Brass Coated Steel Stranded Wire
• Overall Jacket is black with good abrasion and weather resistance

Overhead telephone distribution cables available in 2 or 3 pair versions. Both types incorporate 3 strain wires to support the weight of the cable. The strain wires are yellow PVC insulated, brass coated steel stranded wire. The overall jacket is black polyethylene with good abrasion and weather resistance.

• 250m

0.5mm Polyethylene insulated, polyethylene sheathed, petroleum jelly filled telephone distribution cable to BT specification CW1128.

• 0.5mm Polyethylene Insulated
• Petroleum Jelly filled
• BT Spec telephone distribution cable

This 0.5mm Poly Duct Cable 10PR x 100m Cable intended for external use where protection against moisture is required, for example in ducts. Cable is constructed as follows; 0.5mm plain copper conductor, polyethylene insulated, twisted into pairs and laid up in unit construction. Cable is then petroleum jelly filled and over-sheathed in black polyethylene.

• 10 Pair
• 100m Cable

Cable intended for external use where protection against moisture is required, for example in ducts. Cable is constructed as follows; 0.5mm plain copper conductor, polyethylene insulated, twisted into pairs and laid up in unit construction. Cable is then petroleum jelly filled and over-sheathed in black polyethylene.

• 0.5mm plain copper conductor
• polyethylene insulated
• twisted into pairs and laid up in unit construction
• Cable is then petroleum jelly filled
• over-sheathed in black polyethylene

Cable intended for external use where protection against moisture is required, for example in ducts. Cable is constructed as follows; 0.5mm plain copper conductor, polyethylene insulated, twisted into pairs and laid up in unit construction. Cable is then petroleum jelly filled and over-sheathed in black polyethylene.

• 100m

• 50 Pair
• Jelly Filled Cable
• 100m

• 100 Pair
• Jelly Filled Cable
• Per Meter

• 5 Pair
• Jelly Filled Cable
• Per Meter

• 10 Pair
• Jelly Filled Cable
• Per Meter

• 20 Pair
• Jelly Filled Cable
• Per Meter

Armoured 0.5mm polyethylene insulated, sheathed, steelwire, petroleum jelly filled telephone distribution cable.\nBT specification CW1198

Armoured 0.5mm polyethylene insulated, sheathed, steelwire, petroleum jelly filled telephone distribution cable.\nBT specification CW1198

201D connection box comes with two disconnection strips.

• 10 pair labelling feature
• Inserts directly onto 10 pair modules 2
• Dimensions 17.5mm x 109mm x 8mm

BT 4504 BT Socket to RJ45 Plug PABX Master

• BT to RJ45

PABX RJ45 plug to BT Socket adaptor - type 2 wiring

• BT to RJ45

4 way with right hand plug and socket.

• 15m in length
• Right Hand Plug and Socket Extension Lead
• 4 wire

Best used with bevelled faceplate and 46 or 47mm deep back box to get the extra bend radius that is required for CAT6A installations. The Butterfly design is sometimes preferred over top/bottom jaw design as its slightly easier to wire up.

• Tool less design. No IDC Tool required. Butterfly opening design
• Complies with latest CAT6A performance requirements for frequencies up to 500 Mhz

Best used with bevelled faceplate and 46 or 47mm deep back box to get the extra bend radius that is required for CAT6A installations.

• Tool less design. No IDC Tool required. Small and compact , known as Mini type
• Complies with latest CAT6A performance requirements for frequencies up to 500 Mhz

For CAT6A cables, these plugs are commonly used to make stranded style patch cords and not for use on larger outsized solid core cables which use another type of RJ45 plug with extended earth clip and can incorporate larger conductor sizes (also available in the KAUDEN range). For CAT5e or CAT6 you may be able to use on stranded or solid type in most cases. In any event these plugs can be used on solid and stranded inner conductors with a maximum diameter of 1.1mm.

• For CAT5E/CAT6 solid/stranded or CAT6A stranded patch cables 1.1mm max conductor size.
• Up to 6.5mm diameter approx.
• Three part design
• For CAT5e and CAT6 only two parts used, rear separator can be discarded if required
• On large CAT6A solid cables use extended ground clip plug (1.3-1.45mm, up to 8.5mm diam) (these are available in the KAUDEN range, LJC6A130/10 and LJC6A145/10)
• Use with standard RJ45 Crimping Tool and standard plug boot

This microfilter also known as ADSL filter and splitter separates your analogue telephone service from the data signals used on your broadband service, allowing you to use both simultaneously. It will help you get better voice quality. All our ADSL filters are of very high quality and according to BT specifications. It Meets all SIN346 requirements including 'longitudinal balance' test.

• Applied in voice or data transmission circuits
• Provides isolated conversion between modem and telephone line
• Have filter function,and passed UK test standard

HD Pigtail Video Balun With Surge Protection Twin Pack

• Real-time transmission over UTP cat5e/6
• No power required
• Male BNC with extended 5.9inch (150mm) mini-coax pigtail
• Reliable push-pin terminal block connection for UTP cable
• Built-in TVS (Transient Voltage Suppressor) for surge protection
• Wave Filter Design, Anti-Static Design
• Lightning protection design Grade: III
• 60 dB crosstalk and noise immunity
• Exceptional interference rejection
• ABS engineering plastic housing

Single channel HD Video & Power Transmitter & Receiver

• Real-time transmission over UTP cat5e/6
• NTSC, PAL & SECAM video format compatible
• Male BNC with extended 5.9inch(150mm)mini-coax pigtail
• RJ45 Jack for UTP cable
• Built-in TVS (Transient Voltage Suppressor) for surge protection
• Wave Filter Design, Anti-Static Design
• Lightning protection design Grade: III
• 60 dB crosstalk and noise immunity
• Exceptional interference rejection
• ABS engineering plastic housing

100m Usb Extender

• 100m
• USB Extender