Fibre Connectivity

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

The 22S is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN and Access Networks.\n\n22S offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different fibres; SMF, MMF, DSF, NZDSF.\n\nApplicable from 125μm cladding diameter/up to 3mm sheath diameter fibres with sheath clamp.\n\n22S provides advanced capabilities; including splice result storage of 200 splices, 5-16mm short cleave length splicing .\n\nQuick splicing time is produced in 9 seconds (single mode fibre) and an automated tube-heating time of 30 seconds (single mode 60mm).

Steel Tape Armoured Fibre Optic Cable - Per Metre

• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• The cable is constructed in a multi loose tube construction.

Loose Tube Fibre Optic Cable

• The Loose Tube is suitable for both internal and external use.
• The cable consists of a single tube containing 24 fibres.
• The water blocking gel within it provides moisture protection for cable installation ducts.
• Physical protection and tensile strength are provided by aramid yarn or fibreglass wound around the tube.
• This loose tube fibre optic cable is light weight and small in diameter.

Loose Tube Fibre Optic Cable

• The Loose Tube is suitable for both internal and external use.
• The cable consists of a single tube containing 24 fibres.
• The water blocking gel within it provides moisture protection for cable installation ducts.
• Physical protection and tensile strength are provided by aramid yarn or fibreglass wound around the tube.
• This loose tube fibre optic cable is light weight and small in diameter.

Loose Tube Fibre Optic Cable

• The Loose Tube is suitable for both internal and external use.
• The cable consists of a single tube containing 4 fibres.
• The water blocking gel within it provides moisture protection for cable installation ducts.
• Physical protection and tensile strength are provided by aramid yarn or fibreglass wound around the tube.
• This loose tube fibre optic cable is light weight and small in diameter.

Loose Tube Fibre Optic Cable

• The Loose Tube is suitable for both internal and external use.
• The cable consists of a single tube containing 4 fibres.
• The water blocking gel within it provides moisture protection for cable installation ducts.
• Physical protection and tensile strength are provided by aramid yarn or fibreglass wound around the tube.
• This loose tube fibre optic cable is light weight and small in diameter.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Tight Buffered Fibre Optic Cable

• This is a riser, plenum or general purpose cable.
• Ideal for interconnection of distribution boxes and customer equipment between floors.
• 24-72 fibre cables present and grouped into sub-units.
• A ripcord is located under the jacket to facilitate jacket removal.
• This tight buffered fibre optic cable is ideal for indoor installations of both compact and flexible contructions
• Suitable for manufacturing pre-terminated fibre cables.
• All cables tested according to TIA/EIA-455, IEC-60794-1-1 and EN-187000.
• Suitable for direct termination.

Steel Tape Armoured Fibre Optic Cable

• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

Steel Tape Armoured Fibre Optic Cable

• Presenting the Brand-Rex Steel Tape Armoured Fibre Optic Cable as part of our extensive fibre optic range.
• This fibre optic cable is suitable for internal and external use.
• Polyethylene jacket available upon request.
• The cable consists of a single gel filled tube containing 2-24 fibres.
• CST armour provides resistance against rodents.
• Crush proof
• This Brand-Rex cable has aramid yarn or fibreglass wound around the tube.
• A ripcord is located under the jacket to facilitate jacket removal.
• Suitable for ducts and direct burial.
• Also suitable for occasional flooded ducts.
• The armoured fibre cable has a wide operating temperature range.
• Over 24 fibres in the cable is constructred in a multi loose tube construction.

SC field-installable connectors (FIC) are factory terminated and polished to make fibre terminations fast, easy and reliable.\nThese fibre optic connectors offer terminations in less than 2 minutes without any difficulty and require no epoxy, polishing or crimping.\nThe FIC greatly reduces the installation and set up time. It has a window feature to allow testing with a visual fault locator.

• Polished connector incorporating a mechanical splice
• Singlemode: (50/125)
• Durable, reliable and superior optical performance
• Compatible with standard SC adaptors
• 900μm, 2mm, 3mm and 2x3mm cables
• Termination can be repeated 2-3 times
• Packaging comes with a cable/buffer stripping template
• Complies with IEC, EIA/TIA or Telecordia standards

This sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 port with 2 adapters Multimode LC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 port with 8 adaptors Multimode LC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 port with 2 adaptors - Singlemode LC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 port with 8 adapters Singlemode LC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 Port with 2 adapters - Multimode SC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 Port with 4 adapters - Multimode SC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 Port with 6 adapters - Multimode SC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

The Optronics sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 Port with 8 adapters - Multimode SC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

This sliding tray optical fibre patch system in its basic form is supplied with the panels unloaded ready for you to install the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs.\n\n24 Port with 12 adapters - Multimode SC

• Easy panel identification labelling
• Cable entry 4 x 10mm gland holes, 2 x 20mm gland holes
• Width: 19â€� - 483mm
• Depth: 200mm
• Height: 1U
• Weight: 2.8kg Fully loaded
• Colour: Black

These panels are made from high quality steel and are easily released to pull forward enabling simple access when installing.

• Complete with Bunny Clips and glands
• Cage nuts included
• Available as fully populated

This IP65 distribution box offers the ability to terminate 8 fibres housed in a robust ABS enclosure for indoor and outdoor applications.With the ability to use SC Simplex and LC Duplex adaptor types offering a flexible solution to the end user, enabling them to incorporate a multi functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibres.In addition to the interchangeable adaptors, the enclosure also offers up to 8 exit points for patching cables and 1 standard cable entry point for loose tube, tight buffer, pre-terminated and steel tape armoured cable.Each enclosure has integrated strength member tie positions and bend radius protection with the addition of a removable front cover allowing for quick and easy installation.

• Up to 8 fibres
• Removable splice tray for easy installation
• Multiple adapter options available
• 8 adapter positions
• IP 65
• Accepts loose tube, distribution and pre terminated cables
• Integrated bend radius protection
• Sealing glands for up to 8 exiting cables + 1 incoming cable
• Removable cover for ease of installation
• ROHS, REACH & SvHC compliant
• Supplied with 12 heatshrink splice protectors
• Supplied with transit tubing
• Supplied with wall fixings and tie wraps

Used for connecting between cables and active equipment.

• OM2
• LC-ST
• Duplex
• 15m
• Orange
• 1.8mm diameter cable

High quality SC adaptors - high precision alignment sleeves for reliability and improved reconnectability. For single mode applications a ceramic sleeve is supplied to ensure a high precision alignment.\nFor multimode applications a phosphor bronze sleeve is supplied. The housing is available in different colours with options for flange or flangeless body, metal clips or inbuilt clips. A protective cap is provided at each end of the\nadaptor with the same colour as the adaptor.

• Complies with IEC 61754-4 standard
• High precision alignment sleeve
• Aqua adaptors supplied with zirconia ceramic sleeve
• Low insertion loss and improved reconnectability
• REACH SvHC compliant
• Materials compliant to RoHS2
• Simplex
• Flanged

Duplex Patchcords - Multimode 62.5/125

• Available in SC,ST and LC
• Low Insertion Loss (0.3dB)
• RoHS compliant
• Standard product made on 3mm (nominal dia.) LSZH zip cable.
• Meets all international reliability standards
• Individual Test Sheet and unique Product Identification Number for traceability
• Cable colours available: Orange

Duplex Patchcords - 9/125 - OS1

• Available in SC,ST and LC
• Low Insertion Loss (0.3dB) & Return Loss (>
• 55dB)
• RoHS compliant
• Standard product made on 3mm (nominal dia.) LSZH zip cable.
• Telcordia GR-326-CORE compliant
• Meets all international reliability standards
• Individual Test Sheet and unique Product Identification Number for traceability
• Cable colours available: Yellow

Duplex Patchcords - 9/125 - OS1

• Available in SC,ST and LC
• Low Insertion Loss (0.3dB) & Return Loss (>
• 55dB)
• RoHS compliant
• Standard product made on 3mm (nominal dia.) LSZH zip cable.
• Telcordia GR-326-CORE compliant
• Meets all international reliability standards
• Individual Test Sheet and unique Product Identification Number for traceability
• Cable colours available: Yellow

Duplex Patchcords - 9/125 - OS1

• Available in SC,ST and LC
• Low Insertion Loss (0.3dB) & Return Loss (>
• 55dB)
• RoHS compliant
• Standard product made on 3mm (nominal dia.) LSZH zip cable.
• Telcordia GR-326-CORE compliant
• Meets all international reliability standards
• Individual Test Sheet and unique Product Identification Number for traceability
• Cable colours available: Yellow

Duplex Patchcords - 9/125 - OS1

• Available in SC,ST and LC
• Low Insertion Loss (0.3dB) & Return Loss (>
• 55dB)
• RoHS compliant
• Standard product made on 3mm (nominal dia.) LSZH zip cable.
• Telcordia GR-326-CORE compliant
• Meets all international reliability standards
• Individual Test Sheet and unique Product Identification Number for traceability
• Cable colours available: Yellow

Fast-acting cleaner specifically designed for use with ferrules and bulkheads. Removes organic and ionic soils

• Fast acting

LC Singlemode Duplex Adapter - Blue

Used for connecting between Panels and active equipment, Network Centre Nenco duplex fibre optics cables cords are manufactured from the highest quality connectors and cables. duplex fibre optics cables cords are manufactured using 900um fibres surrounded by aramid yarns and a LSOH sheath, providing rugged, reliable connections. Connectors are precision polished in the factory using advanced techniques to ensure a reliable, high quality termination every time. We offer a range of connector types and specifications. LC, ST, SC, FC Connectors and OM1, OM3, OM4, OS2 fibre types.

• 0.5m Patch Leads