Cable Management

Cable/Conduit cleat to retain cables

• C8
• Minimum Range: 17.7mm
• Maximum Range: 20.3mm
• M6 Stud Hole

Cable/Conduit cleat to retain cables

• C10
• Minimum Range: 22.7mm
• Maximum Range: 25.4mm
• M6 Stud Hole

Cable/Conduit cleat to retain cables

• C14
• Minimum Range: 30.4mm
• Maximum Range: 35.5mm
• M10 Stud Hole

Back plate for smooth-side j. boxes

• 190x140
• Material: Galvanised Steel

Titan 1U Hinged dump panel in black for easy cable management.

• Easy Access to cables
• Cable Managament
• Fits 19 mounting posts
• Textured Black powder Coat

Titan 2U Hinged dump panel in black for easy cable management.

• Easy Access to cables
• Cable Managament
• Fits 19 mounting posts
• Textured Black powder Coat

Cable Tensioner support (pigtail)

• For use with Galvanised steel external cable clamp

Used for the support of dropwire on external walls of buildings or telephone poles.

• Pack of 6
• For Pigtail

Safe-D U-Clip 30 fits perfectly in 30 x 15mm Mini Trunking.\n\nAlternatively Safe-D 30’s can be fixed directly to surfaces,\nwith user-friendly and pliable tabs that simply fold-over\nto secure cables.

• Certified for 2 hours at 970°C
• Fully safety tested and certified
• to BS5839 part 1 compliant
• Thumb friendly, easy fold side-tabs
• Non-corrosive coating
• Ideal for ceiling voids, or popular PVC trunking
• Rounded edges for easy handling
• 100 Pack

Safe-D U-Clip 40 is ideal for fitment in 38mm or 40mm non-metallic trunking bases, or to provide a first-fix solution for securing cables direct to surfaces.

• Certified for 2 hours at 970°C
• Fully safety tested and certified to BS5839 part 1 compliant
• Thumb friendly, easy fold side-tabs
• Non-corrosive coating
• Ideal for ceiling voids, or popular PVC trunking
• Rounded edges for easy handling

Safe-D U-Clip 50 Clips are popular for fitment in 50mm non-metallic trunking bases, or to provide a first-fix solution for securing cables direct to surfaces. Installers should use a fire-rated fixing, such as D-Line D-Fixings, and then simply fold-over tabs to secure cables.

• Certified for 2 hours at 970°C
• Fully safety tested and certified to BS5839 part 1 compliant
• Thumb friendly, easy fold side-tabs
• Non-corrosive coating
• Ideal for ceiling voids, or popular PVC trunking
• Rounded edges for easy handling
• 50 Pack

Safe-D F-Clip 30 is a fire-rated flexible cable clip that is supplied in flat form, and can be quickly folded to make a variety of shapes to most effectively secure cable installations.

• Supplied flat - Space efficient and pocket friendly, Easier handling - to save installation time, Easy folding to consider space and cable volume, Perfect for shot fired fixings
• Fully safety tested and certified to BS5839 part 1 compliant
• 1200ºc melting point
• Non-corrosive finish
• 3x fixing holes for versatility, ideal for
• use with D-Line D-Fixings
• Thumb friendly, rounded corners, 20mm
• wide, and pliable for easy installation
• Fit direct to surface, or in PVC trunkings
• Easy to later add or remove cable(s)
• Uniquely versatile - for shaping as required
• 100 Pack

Safe-D F-Clip 40 is a fire-rated flexible cable clip that is supplied in flat form, and can be quickly folded to make a variety of shapes to most effectively secure cable installations.

• Supplied flat - Space efficient and pocket friendly, Easier handling - to save installation time, Easy folding to consider space and cable volume, Perfect for shot fired fixings
• Fully safety tested and certified as BS5839 part 1 compliant
• >
• 1200ºc melting point
• Locking feature to hold cables most securely…
• simply push the tab through the preferred notch
• Locking tabs can be return-folded for a more secure installation
• 3x fixing holes for versatility, ideal for use with D-Line D-Fixings
• Thumb friendly, rounded corners, 20mm wide and pliable for easy installation
• Fit direct to surface, or in PVC trunkings
• Easy to later add or remove cable(s) - Can be opened/closed up to 5x
• 50 Pack

Safe-D Conduit Clips combine fire performance, quickest fix, and a modern look, to secure cables in 20mm & 25mm outer diameter PVC and galvanised conduit installations... or exposed 20mm or 25mm o/d cables and pipes.\n\nCompared to traditional saddles, where lids must be secured to bases, there is no separate lid - the conduit (and cables) is held by the wrap-design, which has an end tab that simply fits through the opposing notch to enable a secure lock. The tight wrap, that eliminates need for wide-bases, is ideal also for installations in tight spaces.

• Fully safety tested and certified to BS5839 part 1 compliant
• >
• 1200ºc melting point
• Non-corrosive finish
• Unique single piece fixing, only 1x screw required
• Fixing hole is ideal for use with D-Line D-Fixings
• Available in white, black or galvanised finish
• Pack of 20

Safe-D Conduit Clips combine fire performance, quickest fix, and a modern look, to secure cables in 20mm & 25mm outer diameter PVC and galvanised conduit installations... or exposed 20mm or 25mm o/d cables and pipes.\n\nCompared to traditional saddles, where lids must be secured to bases, there is no separate lid - the conduit (and cables) is held by the wrap-design, which has an end tab that simply fits through the opposing notch to enable a secure lock. The tight wrap, that eliminates need for wide-bases, is ideal also for installations in tight spaces.

• Fully safety tested and certified to BS5839 part 1 compliant
• >
• 1200ºc melting point
• Non-corrosive finish
• Unique single piece fixing, only 1x screw required
• Fixing hole is ideal for use with D-Line D-Fixings
• Available in white, black or galvanised finish
• Pack of 20

Safe-D Conduit Clips combine fire performance, quickest fix, and a modern look, to secure cables in 20mm & 25mm outer diameter PVC and galvanised conduit installations... or exposed 20mm or 25mm o/d cables and pipes.\n\nCompared to traditional saddles, where lids must be secured to bases, there is no separate lid - the conduit (and cables) is held by the wrap-design, which has an end tab that simply fits through the opposing notch to enable a secure lock. The tight wrap, that eliminates need for wide-bases, is ideal also for installations in tight spaces.

• Fully safety tested and certified to BS5839 part 1 compliant
• >
• 1200ºc melting point
• Non-corrosive finish
• Unique single piece fixing, only 1x screw required
• Fixing hole is ideal for use with D-Line D-Fixings
• Available in white, black or galvanised finish

Safe-D Conduit Clips combine fire performance, quickest fix, and a modern look, to secure cables in 20mm & 25mm outer diameter PVC and galvanised conduit installations... or exposed 20mm or 25mm o/d cables and pipes.\n\nCompared to traditional saddles, where lids must be secured to bases, there is no separate lid - the conduit (and cables) is held by the wrap-design, which has an end tab that simply fits through the opposing notch to enable a secure lock. The tight wrap, that eliminates need for wide-bases, is ideal also for installations in tight spaces.

• Fully safety tested and certified to BS5839 part 1 compliant
• >
• 1200ºc melting point
• Non-corrosive finish
• Unique single piece fixing, only 1x screw required
• Fixing hole is ideal for use with D-Line D-Fixings
• Available in white, black or galvanised finish

Please note: Brush Plate inserts will not fit decorative metal plates.

• 50 x 50mm

Please note: Brush Plate inserts will not fit decorative metal plates.

• 100 x 50mm

20mm Round Conduit - Black - 3m

• Manufactured in high impact U-PVC.
• 20mm Round Conduit
• 3m long
• Black in colour

20mm Round Conduit - White - 3m

• Manufactured in high impact U-PVC.
• 20mm Round Conduit
• 3m long
• White in colour

25mm Round Conduit - Black - 3m

• Manufactured in high impact U-PVC.
• 25mm Round Conduit
• 3m long
• Black in colour

Manufactured in white U-PVC.

• 25mm o/d x 1.9mm Wall
• 3m
• White

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 16mm
• 100m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 20mm
• 100m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 25mm
• 50m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 32mm
• 25m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 40mm
• 25m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 50mm
• 25m Roll
• Black

Square locked galvanised steel conduit, good mechanical stability and extreme flexibility. Material: galvanised steel. Temp. Range : +300 °C Isolation :IP 40 Standards: EN 50086 galvainsed to DIN 53210 Colour: self colour Usage: high degree mechanical protection

• 20mm
• 50m Roll

Square locked galvanised steel conduit, good mechanical stability and extreme flexibility. Material: galvanised steel. Temp. Range : +300 °C Isolation :IP 40 Standards: EN 50086 galvainsed to DIN 53210 Colour: self colour Usage: high degree mechanical protection

• 25mm
• 50m Roll

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 16mm
• Black
• Pack of 10

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 20mm
• Black
• Pack of 10

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 25mm
• Black
• Pack of 10

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 32mm
• Black
• Pack of 2

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 40mm
• Black
• Pack of 2

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 50mm
• Black
• Pack of 2

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 25mm
• Pack of 10
• Galvanised

Each contractor pack consists of 10 meter conduit and 10 straight fittings including 10 locknuts.

• 20mm
• Conduit Black
• 10m

Each contractor pack consists of 10 meter conduit and 10 straight fittings including 10 locknuts.

• 25mm
• Conduit Black
• 10m

Easily supports cable from flanges\n\nRequires only a hammer to install

• Part Number: 812SC67
• Article Number: 187640
• Material: Spring Steel
• Finish: CADDY ARMOUR
• Flange Thickness (FT): 8 – 12 mm
• Outer Diameter (OD): 6 – 7 mm
• Thickness (T): 0.6 mm

Wire Mesh Tray in Bycro Protective Finish

• 100mm x 35mm
• Mesh Tray
• 3m in length

Cable Tray for Light Duty Use

• Pre Galvanised
• Light Duty
• 3m
• 75mm Wide

Cable Tray for Light Duty Use

• Pre Galvanised
• Light Duty
• 3m
• 150mm Wide

Cable Tray for Light Duty Use

• Pre Galvanised
• Light Duty
• 3m
• 225mm Wide

Cable Tray for Light Duty Use

• Pre Galvanised
• Light Duty
• 3m
• 300mm Wide

2 and 3 way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Horizontal rows
• 60mm deep, keyed base fixing
• Space for ID labelling

2 and 3 way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Horizontal rows
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

Cable Tray for Medium Duty Use

• Pre Galvanised
• Medium Duty
• 3m
• 100mm Wide

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

The PF data box encompasses a wide range of power coated fabricated steel 6C data boxes, two pozi screw (black cage nut / screws) release the top lid for the termination of data modules, the keyed gland hole allows the terminated cables and gland / lock nut to be tightened in position.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• 60mm deep
• 8, 12 and 16-way double entry
• 24-way with square conduit entry

The PF data box encompasses a wide range of power coated fabricated steel 6C data boxes, two pozi screw (black cage nut / screws) release the top lid for the termination of data modules, the keyed gland hole allows the terminated cables and gland / lock nut to be tightened in position.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• 60mm deep
• 8, 12 and 16-way double entry
• 24-way with square conduit entry

The PF data box encompasses a wide range of power coated fabricated steel 6C data boxes, two pozi screw (black cage nut / screws) release the top lid for the termination of data modules, the keyed gland hole allows the terminated cables and gland / lock nut to be tightened in position.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• 60mm deep
• 8, 12 and 16-way double entry
• 24-way with square conduit entry

Anchor Bracket for 25mm Floor Box

• Anchor Bracket
• For 25mm Floor Box

Anchor Bracket for 32mm Floor Box

• Anchor Bracket
• For 32mm Floor Box

Light Duty 90 Degree Flat Bend - Pre Galvanised

• Light Duty
• Pre Galvanised
• 90 Degree Flat Bend
• 75mm

Light Duty 90 Degree Flat Bend - Pre Galvanised

• Light Duty
• Pre Galvanised
• 90 Degree Flat Bend
• 150mm

Light Duty 90 Degree Flat Bend - Pre Galvanised

• Light Duty
• Pre Galvanised
• 90 Degree Flat Bend
• 225mm

Light Duty 90 Degree Flat Bend - Pre Galvanised

• Light Duty
• Pre Galvanised
• 90 Degree Flat Bend
• 300mm

Light Duty Equal Tee - Pre Galvanised

• Light Duty
• Equal Tee
• Pre Galvanised
• 75mm

Light Duty Equal Tee - Pre Galvanised

• Light Duty
• Equal Tee
• Pre Galvanised
• 150mm

Light Duty Equal Tee - Pre Galvanised

• Light Duty
• Equal Tee
• Pre Galvanised
• 225mm

Light Duty Equal Tee - Pre Galvanised

• Light Duty
• Equal Tee
• Pre Galvanised
• 300mm

Braided Sleeving 19-32mm Black 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 19-32mm Grey 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 28-47mm Black 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 28-47mm Grey 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 40-63mm Black 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 40-63mm Grey 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 28-47mm Black 150mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 28-47mm Grey 150mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 40-63mm Black 100mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 40-63mm Grey 100mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Full Nuts M6 Box of 100

• Nuts
• M6 Size
• Bright Zinc Plating
• Box of 100

Full Nuts M8 Box of 100

• Nuts
• M8 Size
• Bright Zinc Plating
• Box of 100

Full Nuts M10 Box of 100

• Nuts
• M10 Size
• Bright Zinc Plating
• Box of 100

Anchor Bolts - Loose

• Size: M10 x 10mm
• Drill Size: 16
• Packed Individually

Metal Cavity Fixings - Packed in 100's

• Metal Cavity Fixings
• Packed in 100

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm
• 2 way through box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black