Cable Management

Cable/Conduit cleat to retain cables

• C10
• Minimum Range: 22.7mm
• Maximum Range: 25.4mm
• M6 Stud Hole

Back plate for smooth-side j. boxes

• 190x140
• Material: Galvanised Steel

Titan 2U Hinged dump panel in black for easy cable management.

• Easy Access to cables
• Cable Managament
• Fits 19 mounting posts
• Textured Black powder Coat

Cable Tensioner support (pigtail)

• For use with Galvanised steel external cable clamp

Used for the support of dropwire on external walls of buildings or telephone poles.

• Pack of 6
• For Pigtail

Please note: Brush Plate inserts will not fit decorative metal plates.

• 50 x 50mm

20mm Round Conduit - Black - 3m

• Manufactured in high impact U-PVC.
• 20mm Round Conduit
• 3m long
• Black in colour

20mm Round Conduit - White - 3m

• Manufactured in high impact U-PVC.
• 20mm Round Conduit
• 3m long
• White in colour

25mm Round Conduit - Black - 3m

• Manufactured in high impact U-PVC.
• 25mm Round Conduit
• 3m long
• Black in colour

Manufactured in white U-PVC.

• 25mm o/d x 1.9mm Wall
• 3m
• White

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 20mm

Our range of Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

The Heavy Duty Cable Trunking are manufactured from white U-PVC.

• 25mm

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 25mm
• 50m Roll
• Black

Polypropylene conduit, self extinguishing, low toxicity & smoke density Material: Polypropylene PP. Temp. Range : -5°C till +90 °C Isolation: IP 44 Standards conduit: IMQ EA 889 NF - USE, frensch quality mark (N696), Crush resistance to 350 N Standards fittings: Polypropylene PP Black, grey and white. Usage: general use public buildings, industrial where limited mechanical protection is required.

• 32mm
• 25m Roll
• Black

Square locked galvanised steel conduit, good mechanical stability and extreme flexibility. Material: galvanised steel. Temp. Range : +300 °C Isolation :IP 40 Standards: EN 50086 galvainsed to DIN 53210 Colour: self colour Usage: high degree mechanical protection

• 20mm
• 50m Roll

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 16mm
• Black
• Pack of 10

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 32mm
• Black
• Pack of 2

Locknuts are used for securing cable glands in position, and are used on the cable gland entry thread. They ensure that the cable gland doesn't come loose.

• 50mm
• Black
• Pack of 2

2 and 3 way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Horizontal rows
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

4 and 6-way data boxes are volume installation products bringing data points to the desk from the sub floor using flexible conduits, normally via a floor access grommet.\nThe boxes are available in rows or in vertical pairs, one of which will suit the termination and cable bend radii of the particular 6C data module used in the installation.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• Rows and vertical pairs
• 60mm deep, keyed base fixing
• Space for ID labelling

The PF data box encompasses a wide range of power coated fabricated steel 6C data boxes, two pozi screw (black cage nut / screws) release the top lid for the termination of data modules, the keyed gland hole allows the terminated cables and gland / lock nut to be tightened in position.

• 6C data cut-outs
• 25mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• 60mm deep
• 8, 12 and 16-way double entry
• 24-way with square conduit entry

The PF data box encompasses a wide range of power coated fabricated steel 6C data boxes, two pozi screw (black cage nut / screws) release the top lid for the termination of data modules, the keyed gland hole allows the terminated cables and gland / lock nut to be tightened in position.

• 6C data cut-outs
• 32mm gland holes
• Black pre-fabricated steel
• Fast release two screw lid
• Keyed gland entry
• 60mm deep
• 8, 12 and 16-way double entry
• 24-way with square conduit entry

Anchor Bracket for 25mm Floor Box

• Anchor Bracket
• For 25mm Floor Box

Anchor Bracket for 32mm Floor Box

• Anchor Bracket
• For 32mm Floor Box

Braided Sleeving 28-47mm Black 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Braided Sleeving 40-63mm Black 25mtrs

• Material: PET
• Covering: ≥ 70%
• Operating temperatures: -50 to +130°C
• Melting point: +260°C
• Flame resistance: self-extinguishing (V2 UL94)
• Specifications: V2 UL94
• DIN 5510 S4/SR2/ST2
• NF F16-101 / F16-102 I2F2
• halogen free
• Applications:sleeving with an expansion ratio from 1 to 2 for general use. It has been developed for rail industry.

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm
• 2 way through box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• White

Circular Conduit Fittings\nBlack PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 25mm Terminal Box
• Black

Circular Conduit Fittings\nWhite PVC-U. Standard 50mm centres fitted with M4 Brass Inserts. Provision for Brass earthing terminals.

• 20mm Terminal Box
• White

Circular Junction Box Lids

• Circular Lid 65mm
• White

Circular Junction Box Lids

• Circular Lid 65mm
• Black

Inspection Tee 20mm

• Inspection Tee
• White
• 20mm

Inspection Tee 25mm

• Inspection Tee
• White
• 25mm

Male Adaptor Conduit Accessory

• Male Adaptor
• 20mm
• White

Male Adaptor Conduit Accessory

• Male Adaptor
• 20mm
• Black

Male Adaptor Conduit Accessory

• Male Adaptor
• 25mm
• White

Male Adaptor Conduit Accessory

• Male Adaptor
• 25mm
• Black

Female Adaptor Conduit Accessory

• Female Adaptor
• 20mm
• White

Female Adaptor Conduit Accessory

• Female Adaptor
• 20mm
• Black

Female Adaptor Conduit Accessory

• Female Adaptor
• 25mm
• White

Female Adaptor Conduit Accessory

• Female Adaptor
• 25mm
• Black

Reducers Conduit Accessory

• Reducers
• 25mm to 20mm
• White

Reducers Conduit Accessory

• Reducers
• 25mm to 20mm
• Black

Double Gang New Media Floor Plate (Stainless Steel)

• 2 Gang
• New Media Floor Plate
• Quad Aperture
• Stainless Steel

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Ties are manufactured from tough durable Nylon 6/6 and are produced on multi impression tools, which mould complete one piece cable ties.

• Tested to underwriters laboratory UL94V2
• Material Nylon: Nylon 66
• Working Temperature Range: -40°C to 85°C
• UL Flammability Rating: UL94
• Oxygen Index: 25% - 28%
• Water Absorption (24 hrs): 1.3%
• Smoke Density: Flaming 35, Non Flaming 13

Cable Tie Bases (Pk100) Black 25mm

• Available in Natural or Black
• 2-Way Self Adhesive Bases
• For use with cable ties up to 3.6mm
• Nylon 6/6

Cable Tie Cradles Small (Pk100) Black

• Black in Colour
• Cradles 17.8 x 12.7 x 8.2mm
• For use with cable ties up to 4.8mm.
• Nylon 6/6

Cable Tie Cradles Small (Pk100) Black

• Black in Colour
• Cradles 22.0 x 16.2 x 9.6mm
• For use with cable ties up to 9.0mm.
• Nylon 6/6

Cable glands provide the highest degree of functionality and safety. The sealing nut is designed to provide a perfect grip and effortless spanner-tight seal.

• Cable Gland
• M20
• 20mm
• Grey

This 4 ring horizontal cable tidy panel enables the installer to maintain neat cabling in 19 racks and cabinets in accordance with cabling standards.\n1U Cable management bar with 4x 65mm vertical rings\nDesigned to give extra support for patch leads\nEnables organisation of patch cables to ISO and EIA/ TIA standards\nAll metal construction\nDimensions (LxWxH): 483x74x44mm

• 1U Cable Management Bar
• 4 Rings
• For 19 Rack Panel Enclosure
• 483x74x44mm (LxWxH)

The brush strip panels enable the installer to organise the cabinet while minimising disruption of airflow.\nUnlike letterbox-style brush panels, our single sided panels offer the advantage that one item can be used for both a small or (by using 2 pieces, one inverted) a large opening.

• 1U brush strip panel (half open top)
• ï‚· Gives a tidy appearance to the opening
• ï‚· Helps maintain rack air-cooling efficiency
• ï‚· Patch cords and system cables can be easily accessed at the front of the rack
• ï‚· If required, two panels can be mounted adjacent to each other to provide a larger letterbox-style opening
• Specifications
• ï‚· Weight: approx. 220g
• ï‚· Dimensions: 482.6 x 8.6 x 44.5mm
• ï‚· Opening: approx. 388 x 32.3mm
• ï‚· Material: steel approx. 1.5mm thick
• ï‚· Finish: powder painted black

Moulded enclosure with smooth walls and screw on lid IP56 Rated

• 100mm x 100mm 50mm

Moulded enclosure with smooth walls and screw on lid IP56 Rated

• 120mm x 80mm 50mm

Moulded enclosure with smooth walls and screw on lid IP56 Rated

• 150mm x 110mm 70mm

Moulded enclosure with smooth walls and screw on lid IP56 Rated

• 190mm x 140mm 70mm

Moulded enclosure with smooth walls and screw on lid IP56 Rated

• 380mm x 200mm 120mm

A floor and desk grommet is also used to interconnect the sub floor to the office floor. Cables travel through the floor grommet to the desk

• Circular and rectangular product
• Floor cut out diameter- 46mm
• LSZH tough ABS plastic body
• Cable mouth size- 12mm x 125mm
• Cable Diameter Max: 30mm
• Cable Diameter Min: 12mm
• Colour: Black
• External Depth: 38mm
• External Diameter: 62mm
• External Width: 62mm
• Internal Diameter: 34mm
• Material: LSZH tough ABS Plastic Body
• Panel Cutout Diameter: 46mm

A floor and desk grommet is also used to interconnect the sub floor to the office floor. Cables travel through the floor grommet to the desk

• Circular and rectangular product
• Floor cut out diameter- 46mm
• LSZH tough ABS plastic body
• Cable mouth size- 12mm x 125mm
• Cable Diameter Max: 30mm
• Cable Diameter Min: 12mm
• Colour: Grey
• External Depth: 38mm
• External Diameter: 62mm
• External Width: 62mm
• Internal Diameter: 34mm
• Material: LSZH tough ABS Plastic Body
• Panel Cutout Diameter: 46mm

A floor and desk grommet is also used to interconnect the sub floor to the office floor. Cables travel through the floor grommet to the desk

• Circular and rectangular product
• Floor cut out diameter- 75mm
• LSZH tough ABS plastic body
• Cable Diameter Max: 50mm
• Cable Diameter Min: 15mm
• Colour: Grey
• External Depth: 38mm
• External Diameter: 88mm
• External Width: 62mm
• Internal Diameter: 62mm
• Material: LSZH tough ABS Plastic Body
• Panel Cutout Diameter: 75mm

Brush Modules simply snap into any compatible faceplate and are commonly used to hide Audio Visual cables behind walls and so giving a clean appearance to your home rather than bundles of wires hanging down the wall or trailing around in the living room. Two plates are usually installed, one for entrance and the other for the exit of cables. Commonly these are at the top and bottom of the wall where the equipment resides.\n\nNOTE; They are meant to stand alone in their own faceplate and not intended for use alongside other modules in the same faceplate or alongside other wall sockets in the same channel where hazardous voltages may be accessible through the Brush Module.

• Fits 25x50mm aperture for use with compatible Modular faceplate system
• Flame Retardant
• Ideal for Audio Visual applications

Brush Modules simply snap into any compatible faceplate and are commonly used to hide Audio Visual cables behind walls and so giving a clean appearance to your home rather than bundles of wires hanging down the wall or trailing around in the living room. Two plates are usually installed, one for entrance and the other for the exit of cables. Commonly these are at the top and bottom of the wall where the equipment resides.\n\nNOTE; They are meant to stand alone in their own faceplate and not intended for use alongside other modules in the same faceplate or alongside other wall sockets in the same channel where hazardous voltages may be accessible through the Brush Module.

• Fits 50x50mm aperture for use with compatible Modular faceplate system
• Flame Retardant
• Ideal for Audio Visual applications