Tools & Site Equipment

RJ45 Plug Crimping Tool

• Professional RJ45 Crimping Tool for 8 position 8 Contact RJ45 Plugs
• With Handle lock latch
• Extra simple cable cutter
• PVC Handle
• Steel construction

Multi Function Network Cable Stripper

• For – CAT5e, CAT6 ,CAT6A ,UTP ,FTP network cables
• Also strips RG59-6-11-7 cables and other special audio cables
• Removable cartridge for RG type cables listed above
• Strips flat telephone cable
• Cable cutter function

Cable dispenser for dispensing reeled wire jumper and internal cable up to 12 wires and PVC power cable.

• Tubular steel framed dispenser
• For dispensing reeled wire jumper and internal cable up to 12 wires and PVC power cable
• Designed for use with up to two reels simultaneously provided the total width does not exceed 225mm
• Has an integral carrying handle and is portable

Supplied as standard with 110 blade, but now with optional blades for Krone and Bix systems.\n\nHigh quality punch down tool with high and low impact adjuster and lockable storage in handle for replacement blade. Bayonet style mount allows the blades to be easily and quickly replaced.

• High Quality Punch Down Tool
• Lockable Storage in Handle for Replacement Blade
• Bayonet style mount allows blades to be replaced quickly and easily

Crimping Tool to be used with Jelly Crimps

• 145mm long with cutter

Spoola is a unique cable carrier expertly designed by Electricians and Data cable installers for onsite work. Spoola not only carries the reel it also acts as a secure dispenser when on site. \nNew to the design for 2016 are the rubber feet to stop slipping, and the unique cable tidy bar for ease of dispensing and end of day tidy up.\nAt 2.8kg it is sturdy but lightweight and can hold an amazing 50kg of cable reels complete with cables.

• Robust steel construction
• Light to carry
• Folds flat for easy storage
• Anti-slip rubber feet
• Easy to set up
• Holds multiple reels
• Acts as third 'hand'
• Additional chain support
• New Cable Tidy Bar

Wire inserter tool made from toughened plastic, with a hardened steel blade that lets you terminate and trim the wire to the correct length, via one push of the impact tool.

• Made from toughened plastic
• IDC tool
• Simple one push design

A special tape offering superb fastening strength that can be opened and closed thousands of times

• Black Roll
• 10mm
• 25m

A special tape offering superb fastening strength that can be opened and closed thousands of times

• Black Roll
• 16mm
• 25m

A special tape offering superb fastening strength that can be opened and closed thousands of times

• Black Roll
• 25mm
• 25m

High quality glass fibre reinforced helically wound epoxy rod giving good adhesion properties for the outer polyethylene coating. This construction gives excellent bending elasticity which makes it ideal for short to long installations into ducts. It is an ideal and fast way of installing draw ropes and winch ropes into ducts, ready for cable pulling operations.

• Supplied on a free standing frame for easy handling.
• Zinc Plate Finish
• Rod comes complete with guide tips.

This British made blue 6mm x 500m 3-strand construction split film twisted drawcord polypropylene rope is supplied on a wooden drum for easy dispensing. \nThis rope is ideal as a draw cord rope for the telecommunications industry for pulling cables underground but is also widely used in other industries such as building, industrial, leisure, agricultural & transport. \nThis draw cord rope floats and is resistant to chemicals, rot and mildrew. The breaking strain of this drawcord rope is approx 550kg. \nWeight Approx 7kg

• Blue
• 6mm x 500m
• 3-strand
• Strain of Rope: 550kg
• Total Weight of rope is approx 7kg

Available in a range of sizes and colours. Manufactured from flame retardant self extinguishing PVC to BS EN 60454

• 19mm x 33m
• Blue

Available in a range of sizes and colours. Manufactured from flame retardant self extinguishing PVC to BS EN 60454

• 19mm x 33m
• Black

Available in a range of sizes and colours. Manufactured from flame retardant self extinguishing PVC to BS EN 60454

• 19mm x 33m
• White

Claw Hammer with a drop forged, semi-polished, heat treated steel head, a full size round face for accurate striking, and a full claw for maximum pulling power.

• Blue cushioned rubber grip for comfort.
• Weight 450g (1lb).

The Faithfull general purpose hammer for builder and contractor for delivering close heavy blows.\n\nPrecision ground striking faces, specially hardened and heat treated to withstand the most high impact heavy applications.

• Manufactured in accordance with BS876.
• Fitted with a selected fully seasoned hickory handle.

Chrome plated zinc head with two screw-in nylon faces which are designed to be replaced when worn.\nTHO708 is fitted with wooden handles and have two white nylon faces.\nUsed as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.

• Diameter 25mm (1 in).
• Weight 250g (1/2lb).

The Vitrex 10 1060 Non Marking Rubber Mallet is ideal for setting large tiles into adhesive. It has a non-marking white rubber head.

• Non Marking Rubber Mallet
• Ideal for setting large tiles into adhesive
• Has a non-marking white rubber head.

The Faithfull all purpose knife with a strong die cast metal body fitted with an anti-slip grip and a thumb operated slide with three pre-set blade depths, fully retractable blade for safe storage. internal storage for replacement blades. Five heavy-duty blades are included.

• Strong die cast metal body
• Fitted with an anti-slip grip and a thumb operated slide
• Three pre-set blade depths
• Fully retractable blade for safe storage
• Internal storage for replacement blades
• Five heavy-duty blades are included

10 utility knife blades in a dispenser.\n0.6mm thick, 61.5mm long.\nFit standard retractable and fixed blade utility knives.\nMade from high carbon steel.

• 10 utility knife blades in a dispenser.
• 0.6mm thick, 61.5mm long.
• Fit standard retractable and fixed blade utility knives.
• Made from high carbon steel.

Torpedo level with plastic body, aluminium frame and magnetic base. With V-groove for pipework.

• Supplied with a mini line level with a magnetic base.
• Torpedo Level Length: 225mm.

Light-duty bolt cutters, tubular shafted with soft handles for comfort.\nSuitable for cutting low tensile material.

• 24in bolt cutter.
• Carbon steel, 52-62HRC.

A set of 3 aviation snips; left, right and straight cut. Compound \nleverage for easier cuts and a safety latch for storage. Comfortable colour coded vinyl cushion-grip handles.

• Set of 3
• Colour Coded Vinyl cushion-grip handles
• They can cut through aluminium, sheet metal, leather, asphalt and rubber.

Designed to grip and cut, the front section of the serrated jaws are ideal for gripping flat surfaces and the serrated sections match the profiles of rods, pipes and tubing.\nThe induction hardened jaws are suitable for cutting a wide range of materials including medium and medium hard wire.\nMade from Chrome-Vanadium steel and fitted with cushion-grip sleeves for user comfort.

• Made from chrome vanadium steel and fitted with cushion grip sleeves for user comfort.
• Length: 160mm (6.1/4in)

Diagonal cutting pliers are ideal for cutting medium to medium hard wire close to the flat surface.The tapered head profile is ideal for accessing confined spaces.\nThe cutting edges on the jaws are induction hardened and individually processed for maximum performance. \nMade from chrome vanadium steel and fitted with cushion grip sleeves for user comfort.

• The 180mm heavy-duty cutting plier has a high leverage design.
• Length: 180mm (7 in)
• Wire cutting capacity: 1.8mm

A specialist tool for gripping pipes, nuts and bolts with a quick action sliding pivot to provide a wide range of jaw settings. The offset jaws are angled to ensure a positive action with extra power when leverage and grip are applied.\n\nMade from chrome vanadium steel and fitted with cushion grip sleeves for user comfort.

• Size: 250mm (10in).
• Jaw Type: straight/curved.
• Capacity: 36mm.

These Faithfull VDE Diagonal Cutters are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to IEC 60900:2004. All Faithfull VDE rated tools can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC.\n\nThese side cutters have induction hardened cutting edges for superior cutting performance with a Swedish pattern head designed for cutting wire close to a flat surface.

• Length: 160mm (6 1/4in).
• Cutting Capacity: For medium hard wires 1.6mm.

These Faithfull Diagonal Cutters are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to IEC 60900:2004. All Faithfull VDE rated tools can be used safely when working on live electrical wires at voltages of up to 1,000 volts AC.\n\nThese heavy-duty side cutters have induction hardened cutting edges for superior cutting and a high leverage design means that less effort is required when cutting.

• Length: 180mm (7in).
• Cutting Capacity: Hard Wire: 1.8mm.

The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured.

• Replacement blades available.
• Blade length: 150mm (6in).

12in heavy-duty Hacksaw 300mm (12 in).

• Uses standard 300mm (12 in) blades.
• Comfortable die-cast aluminium handle.
• Prevents blade wobbling - minimizes breakage.
• Cuts faster and smoother than regular hacksaws.

Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2 mm increments.\nThe set of three is supplied in a metal storage case.

• The set of three is supplied in a metal storage case.
• 6-30mm
• Rising in 2mm increments

Faithfull Soft-Grip VDE Screwdriver Set of 5.\n\nFaithfull VDE screwdrivers are manufactured to EN 60900:2004 and individually tested at 10,000V before leaving the factory, guaranteeing a safe working limit of up to 1,000V to provide the maximum level of safety.\n\nThe screwdrivers feature a two-component, slip-resistant, soft-grip handle with high quality Chrome Vanadium steel blades correctly tempered and hardened for high torque and strength.

• For use on terminal blocks, control cabinets, switches relay and sockets.
• The set contains the following sizes:
• 3 x Slotted 4.0 x 100mm, 5.5 x 125mm, and 6.5 x 150mm.
• 2 x Phillips PH1 x 80mm and PH2 x 100mm.

This Voltage Tester determines whether there is current flowing through a wire and to test for proper grounding.

• Test range 100 - 250V
• Large: 190mm x 3.5mm
• Small: 140mm x 3mm
• Plastic insulating sleeve on the screwdriver blade.

For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder has a hardened and tempered steel shaft with a quick-release chuck.

• Length: 60mm

These Faithfull Pozi tip screwdrivers with high quality, correctly hardened and tempered Chrome Vanadium steel blades. With full size bi-material soft-grip handles for maximising user comfort and firm non-slip gripping.

• Each handle is colour coded with a drive icon displayed on the end for easy identification.
• Type: Pozidriv Tip: PZ 2.
• Length: 40mm (1.9/16in) Stubby.

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 21mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 25mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 32mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 46mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 51mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 76mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 102mm

The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals.

• Suitable for use in most variable speed power drills.
• Diameter: 127mm

Arbor for use with Faithfull holesaws and all other brands available in the UK.

• Suitable for use with Bi-metal and Tungsten carbide tipped holesaws sizes 32 -210mm.

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.\nPhosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.\nThe Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.

• Designed for fitting dry linings to studding.
• Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.
• Drywall Screw, Bugle Head, Course Thread Black Phosphate Boxed
• Type: Bugle Head
• Thread: Single Course Thread
• Finish: Black Phosphate Finish
• Size: 3.5 x 25mm
• Pack: Box 200

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.\nPhosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.\nThe Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.

• Designed for fitting dry linings to studding.
• Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.
• Drywall Screw, Bugle Head, Course Thread Black Phosphate Boxed
• Type: Bugle Head
• Thread: Single Course Thread
• Finish: Black Phosphate Finish
• Size: 3.5 x 32mm
• Pack: Box 200

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.\nPhosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.\nThe Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.

• Designed for fitting dry linings to studding.
• Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.
• Drywall Screw, Bugle Head, Course Thread Black Phosphate Boxed
• Type: Bugle Head
• Thread: Single Course Thread
• Finish: Black Phosphate Finish
• Size: 3.5 x 38mm
• Pack: Box 200

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 3/4 x 8
• Pack: Box 200
• Can be used with various screw cover caps.

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 1 inch x 8
• Pack: Box 200
• Can be used with various screw cover caps.

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 1.25 inch x 8
• Pack: Box 200
• Can be used with various screw cover caps.

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 1.5 inch x 8
• Pack: Box 200
• Can be used with various screw cover caps.

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 1.75 inch x 8
• Pack: Box 200
• Can be used with various screw cover caps.

These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.\n\nIdeal for use in many ironmongery, electrical and plumbing applications.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.\n\nThe Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.\n\nThe countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

• General Purpose Screw CSK Twin Thread Zinc Plated Boxed
• Head: Countersunk
• Thread: Twin Thread
• Finish: Zinc Plated
• Size: 2 inch x 8
• Pack: Box 200
• Can be used with various screw cover caps.

The Faithfull Dust Sheets are professional quality dust sheets for domestic use made from 100% cotton twill for long life.\nAbsorbs paint splashes and is machine washable at low temperatures.\nSize: 12ft x 9ft.

• Made from 100% Cotton twill
• 12ft x 9ft (3.5m x 2.6m)
• Machine washable at low temperatures.

The Faithfull metal frame mastic or skeleton gun which will accept all standard size adhesive and sealant cartridges up to 425ml. Suitable for all trades and home use. The rounded shaped trigger mechanism ensures user comfort reducing the fatigue from repetitive use.\n\nA handy nozzle cleaning pin is provided on the handle.

• Size: 425ml.
• Barrel length 285mm.
• Accepts both C20 and C30 size adhesive and sealant tubes

These wipes have the same powerful industrial-strength cleaning formula as Multi-Purpose Big Wipes, but are combined with a high performance dual-sided fabric. They have double the cleaning power and are able to remove even the toughest stains and dried-on dirt.\n\nThese wipes are designed for use by anyone who needs a very effective and immediately on-hand cleaning product. They are a high-performance, mobile multi-cleaner that will tackle just about any dirt or stain.\n\nDuring manufacture, the fabric goes through a second process to bond heavy-duty fibres to create a super-tough scrub face that loosens even the most stubborn grime and assists with the removal of drying paints, heavy-duty adhesives and PU foam. The specially treated smooth face absorbs the grime ensuring a super-clean finish every time.\n\nThe BIG WIPES Heavy-Duty formula is not only a super-strength industrial cleaner, it is also antibacterial. This provides added protection to users working in potentially hazardous environments, outside or in. They also provide added protection against MRSA, E.Coli, Salmonella, Listeria, Clostridia, Enterococcus, Pseudomonas, Staphylococcus Aureus and Weils Disease.\n\nThe Big Wipes' advanced hi-tech cleaning formula means these wipes are unique in their ability to clean a vast range of subtances from hands, tools and surfaces, including:\n\nGeneral grime, Grease, Oil and water-based paints and coatings, PUR and instant-grab adhesives, Silicone and acrylic sealants, PU foam, EPOXY fillers and grouts, Oil, Tar, Inks and permanent marker.\n\nThey are ideal for the home, office, workshop, van or factory.\n\nThese wipes act as a multi-purpose degreaser that makes them great for cleaning around cookers and for messy jobs such as changing the extractor filter. Use them to clean up old paint and sealant rather than having to paint again. They will remove most dirt and grime without effecting old paint.

• 80 full size extra heavy duty wiped in a handy tub
• Ideal for the home, office, workshop, van or factory.

The combination of a ratchet cutting action and a lopper blade makes the Faithfull Pipe Cutter tool highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed approximately three times to complete the cut.\n\nSuitable for cutting neoprene hose, polythene pipe or fabric reinforced solid rubber up to 42mm outside diameter at right angles to the tube.\n\nSpare Blade available No. FAIPPC42BLA.

• Suitable for cutting neoprene hose, polythene pipe or fabric reinforced solid rubber up to 42mm outside diameter at right angles to the tube.

These Forgefix plastic Expansion Wall Plugs are an extremely popular all-purpose lightweight fixing. They are colour-coded for size.\n\nThe anti-rotation moulding at the head of the plug improves the holding power when inserted. It provides a cost effective solution for lightweight fixing applications. When a screw is inserted, the screwing action wedges the plug firmly in place, the soft material conforming tightly to the wall.\n\nThe wall plugs are suitable for most types of threaded screws, including multi-purpose, general purpose, coach screws etc. Not suitable for Machine Screw threads.\n\nConveniently supplied on a sprue.

• Screw Size: No.6-8 (3.5-4mm)
• Drill Size: 5mm.
• Pack Size: Bulk Box 100.

These Forgefix plastic Expansion Wall Plugs are an extremely popular all-purpose lightweight fixing. They are colour-coded for size.\n\nThe anti-rotation moulding at the head of the plug improves the holding power when inserted. It provides a cost effective solution for lightweight fixing applications. When a screw is inserted, the screwing action wedges the plug firmly in place, the soft material conforming tightly to the wall.\n\nThe wall plugs are suitable for most types of threaded screws, including multi-purpose, general purpose, coach screws etc. Not suitable for Machine Screw threads.\n\nConveniently supplied on a sprue.

• Screw Size: No.8-10 (4-5mm).
• Drill Size: 7mm.
• Pack Size: Bulk Box 100.

9 Piece Varipitch Universal Holesaw Plumbers Kit manufactured from a bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting.\n\nThey are ideal for use on a wide variety of materials including wood, chipboard, plywoods, plasterboard, non-laminated plastics, and non-ferrous metals. Suitable for use in most variable speed power drills.

• Supplied in a sturdy aluminium case
• Kit containins 6 x Varipitch Holesaws: 19, 22, 29, 38, 44 and 57mm, 1 x 3/8in Hexagon Arbor for Holesaws 14-30mm, 1 x 7/16in Hexagon Arbor for Holesaws 32-152mm, 1 x Arbor Adaptor

Pyro Mate Silicone is a neutral cure elastic silicone sealant which conforms to BS 476 Part 20/EN1366-4 (2006) for fire retardancy and has a fire rating of up to 4 hours in certain joint configurations. Acoustic rated to BS EN ISO 140/3. tested for air permeability to EN13141-1 Ventilation for buildings. Performance testing for components/products for residential ventilation. Conforms to ISO 11600 class: F 25LM when tested to ISO 9047, 8339 and 10563. Also conforms to SNJF norms.

• Fire rated to EN1366 Part 4
• Neutral cure – adheres to most building surfaces, porous and non porous
• Permanently flexible (25% movement accommodation)
• Excellent weathering characteristics – suitable for internal and external use.
• Can be used in joints up to 30mm wide.
• No priming required for most construction substrates
• Non slump - easy to apply and tool off.

PVCu Cream Cleaner is a solvent-free formulation designed to remove ingrained dirt, stains and pollution from PVCu window frames without scratching. Buffs to a deep sheen.

• Cream Cleaner
• PVCu
• 1 Litre tub

We stock the full range of RBF cable clips, which include Twin and Earth clips and expandable round clips.\nClips are available in boxes of 100 up to bulk carton quantities

• 5-7mm
• Black

We stock the full range of RBF cable clips, which include Twin and Earth clips and expandable round clips.\nClips are available in boxes of 100 up to bulk carton quantities

• 5-7mm
• White

A high quality glass fibre reinforced helically wound epoxy rod giving good adhesion properties for the outer polyethylene coating. This construction gives excellent bending elasticity which makes it ideal for short to long installations into ducts. It is an ideal and fast way of installing draw ropes and Winch ropes into ducts, ready for Cable Pulling operations.

• 9mm diameter
• 100meter long
• Weight 30Kg

Expert Quality, saw edge, manufactured from high speed steel strip, electron beam welded to high quality carbon steel backing. Display packed two blades per card.

• 24 Pitch

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

• 5.5mm Diameter
• 85mm Length

Crimp tool BNC, for RG59

• for RG59

Co-ax cable stripper 3 blade

• 3 blades

An easy-to-use 'cyclops' stripper for UTP and STP cables.

• Data cable stripper for twisted pair
• Suitable for voice, data, audio, security & fibre optic cables up to 11mm O.D.