Test & Measurement

For use with test telephones.

• Cord set 6/10E
• For general use. 'A' end has jack for plug 431A/631A.'B' end has 3 crocodile clips. Cord length 200mm.Cord set 6/10D
• For use with KRONE 237A modules. 'A' end has jack plug for 431A/631A. 'B' end has plug 440A (4 pole) and 1 crocodile clip for earth. Cord length 200mm.Cord set 6/10B
• For use with KRONE 237A modules. 'A' end has jack plug for 431A/631A. 'B' end has plug 244A (2 pole). Cord length 200mm.Cord set 6/10K
• For use with KRONE 241B module (as used in Box Connection 201).'A' end has jack plug for 431A/631A. 'B' end has plug for low profile strip (2 pole). Cord length 200mm.

Cord connecting 6/10K mini Krone enables any test equipment fitted with the standard BT type plug 431A/631A to connect directly via a pole mini Krone plug to a KRONE 241B module. This professional telecom cord connect includes a crocodile clip (aka: Alligator clip) terminated earth connection lead.

• Two pole mini Krone plug
• BT type 431A/631A jack
• Cord length 200 mm
• Earth wire terminated with a crocodile clip
• Low priced, hard wearing, professional quality cord connection set
• Ideal cordset for use with test telephones (Butt-in Sets)

The SLT3 tester is a rugged lightweight product designed to verify the integrity of 1,2, 3 and 4 pair UTP channels. Incorporating a unique 3-in-1 design this tester features built-in modular jacks for USOC EIA 568A and 568B wiring sequences. Simply connect the master and slave unit to each end of the cable under test and the SLT3 automatically verifies correct cable sequence as well as open and short circuits.

• Molex SLT3S Tester
• Innovative 3-in-1 design features modular jacks for testing USOC EIA 568A and 568B cabling systems
• Accurately verifies the continuity and sequence of 1 2 3 and 4 pair UTP and FTP channels

2.5mm to 1.25mm Adapter for Visual Fault Locator

• This is a 2.5mm to 1.25mm adapter for visual fault locator.
• It simply plugs in to the 2.5mm hole to convert it to a 1.25mm hole.

For Voice,Data and Network cables.\n\nEconomically priced for confirmation of wiring connection status on RJ45 based networks. Includes master and remote in a handy carry pouch. Sometimes known as a LAN tester in the trade. Will locate short circuit , open circuit and wrong connection using the attached remote. Has two speeds for testing.

• Twin Speed
• Short circuit , open circuit and wrong connection Detection
• Covers UTP and FTP
• RJ45 & RJ11 Support