Test & Measurement

Netcat Micro NC-100 Tester

• Test STP, UTP and coaxial cables
• Detects shorts, opens, reversed polarity, crossed and split pairs
• Simple testing of LAN wiring and phone lines
• Warning of hazardous voltages
• Checks for reversed telephone wires

On the 8 way body, contacts on opposite sides are separate giving 1 x 8 contacts.

• USA and International 8/8 plug

Chesivale's accessory cord set 6/10B is for use with Krone 237A modules. The A end has a jack plug for the 431A/631A, while the B end has a 2-pole (244A)

Designed specifically for large copper networks, the 600J generates short bursts of 1kHz sine waves at any of four cadences. Balanced sine wave tone generator prevents disruption of digital traffic.

• Micro controlled
• Low-battery warning
• Crush proof
• Chemical Resistant
• Indicates Short Circuits
• Balanced Output
• High Level Output
• Waterproof

Designed to protect lines carrying digital transmission by alarming and locking the engineer out ig digital traffic is present, preventing the possibility of dropping a digital line or circuit.

• Revolutionary DigAlertâ„¢ protection technology
• Loudspeaker function
• Ideal for customer premises outside environment

NETcat Pro Accessory Kit with carry case This accessory kit includes the carry case and seven (7) digital remote units to be used with the NETcat Pro base unit.

• NETcat Pro Not Included

The 701 kit is recognised by technicians around the world as the industry standard for cable and wire identification.The kit can be used to identify single conductors or cables within a bundle, at a cross connect point or on any conductive material.

• Continuity testing
• Talk battery supply
• Selectable warble tone
• Weather resistant design
• RJ11 test lead
• 3-colour LED (identifies AV ring voltage)

LAN Toner Kit for any wiring system including Datacom, Telecom, Security/Alarm, Audio And CATV

• Designed for the network installation and maintenance professional, the LAN Toner sendstone and blinks HUB, Switch Port, and PC activity lights for fast identification.
• This kit can be used on any wiring system including Datacom, Telecom, security/alarm, audio and CATV
• Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier in a rugged, woven nylon carrying case (700C)

The 620K security and alarm cable tracing kit comprise of the new PE 620 Loop Verifier and the popular Model 200EP Inductive Amplifier. Designed specifically for the security and alarm industry, the PE 620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs. Both units fit comfortably in the rugged 700C carrying case made of durable woven polyester.

• Connection to either normally open or normally closed loop pair
• Distinct audible tone when alarm condition occurs
• Quickly confirms switch function
• Locate intermittent faults
• Continuity test

NETcat® Pro NC-500, wiring and network service tester with TDR function

• Length measurement using TDR function up to 600 m
• Four selectable tone signals for cable identification
• Displays active network devices (PC or hub) in 10/100 Base-T networks
• NVP calibration
• ID detection of up to eight remote units with optional NC-510 accessory kit
• Testing of twisted pair (UTP, STP) and coaxial cables
• Locating short-circuits, breaks, incorrect wiring and split pair errors

Waterproof Butt Phone protected against water, temperature change, dust and impact through revolutionary design.

• Loudspeaker (one-way)
• Fully waterproof unit
• 3 year warranty
• Line polarity indication
• Large belt clip
• Low battery indication
• Digital circuit safety
• Supplied with crocodile clips
• Excessive voltage alarm
• Automatic lock out
• High impact resistance
• Ideal for customer premises outside environment

Tempo TM500 UK Test Phone - Telephone test set

• Device Type: Telephone test set

BT 431A Plug to 4mm Adaptor

NG Harrier Mains PSU (UK)

A two part test system that overcomes the complexity associated with installing commissioning and maintaining ISDN circuits. Optional components include Passive Monitor to trace the D-Channel activity of connected Terminal Equipment, Protocol Analyser to decode the D-channel protocol, NE Mode to emulate the network and So Test adapter.

• Targeted Help
• Connection diagrams
• Automatic storage of results
• Comprehensive service testing
• POTS interface voltage measurement
• Handset automatic test mode
• Voice Announcement
• Telephony Button