Power Products

This Device built to a very high standard and was designed to offer a superior level of protection. Each of the Surge Protection Components ( VDR/MOV) is duplicated by putting two components in parallel. We have also included an input EMC filter to combat Radio Frequency Interference consisting of two X capacitors with a common mode choke to make this a truly first class piece of equipment. If the unit suffers a worst case strike then internal thermal fuses will blow and the green light will go out to warn you that it no longer functions.

• Horizontal 19â€� Rack mountable with both Surge protection and RFI Filter
• On/Off switch . Green Surge Status Light
• Earth Terminal incorporated
• Surge Protected . Live to Neutral . Live to Earth . Neutral to Earth
• Six 13 Amp sockets including 3 Metres mains cable with 13 Amp plug.

SOHO 3 way PDU from titan

• Soho 3 way

GP Ultra Alkaline batteries are specially formulated to meet the increasing demands of today's new generation of power hungry devices such as : Toys, Torches, Portable Radios, Smoke Alarms and Games Console Controllers.

• Available in all 5 of the most popular sizes : AA, AAA, C, D, and 9V
• For applications where high current over longer periods is required
• Ideal for units such as RC model construction, portable radios, etc

GP Ultra Alkaline batteries are specially formulated to meet the increasing demands of today's new generation of power hungry devices such as : Toys, Torches, Portable Radios, Smoke Alarms and Game

• Available in all 5 of the most popular sizes : AA, AAA, C, D, and 9V
• For applications where high current over longer periods is required
• Ideal for units such as RC model construction, portable radios, etc

16 Way Boxed PSU 20 Amp PTC Fuses Surge Protected

• 16 Way x 20 Amp

12Vdc 8 Ch Rack Mount PSU 8 Amp PTC Fused 1U

• Input AC100-240V,50/60Hz, rated 3Amp main fuse
• 8 Amp supply current
• 8 x 12VDC Outputs
• Auto-reset PTC fuse for each output, rated 1.35Amp

12v X 1amp Inline PSU C/W 3.6m Lead And UK Plug

• Inline CCTV Power Supply 12V 1A

12v X 2amp Inline PSU C/W 3.6m Lead And UK Plug

• Inline CCTV Power Supply 12V 2A

12v X 5amp Inline PSU C/W 3.6m Lead And UK Plug

• Inline CCTV Power Supply 12V 2A

4 Way Surge protection extension socket with a 2m lead

• 2m lead
• 4-way socket
• Surge protected

Surge protection extension socket 2m lead up to 10 power sockets and 1 modem socket.

• Up to 10 power sockets
• 1 modem sockets
• 2m lead

Vertical IEC PDUs are widely used to accommodate cabinets where a higher number of IEC sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• 12 Way
• IEC C13 3m Lead
• C20 Vertical Plug
• Shrouded switch and switch cover

• Connect all your ancillary devices to the UPS
• 2 meter, 10A rated 1mmfont- 2 cablefont-
• 4 UK Heavy Duty Socket Outlets
• Neon Indicator
• Fused outlet for safety

Protects computers and sensitive electronic equipment from being damaged by electrical surges and spikes.

• Non-rewireable
• Keyholes for wall mounting
• Extension lead measures 5 m in length

A 2m Black IEC C13 to C14 jumper cord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the jumper cord has a rating of 5A and is fully standards compliant (IEC 60320-2-2,UL,CSA,VDE,KEMA,DEMKO,NEMKO,SEMKO,OVE,IMQ,CEBEC, FINLAND, FRANCE, PSE, SAA, CE). \nThe extension lead is fitted with a male IEC C14 (EL705) moulded 3 pole straight 250V 10A connector, approved to IEC EN60320 and a female IEC C13 (EL-701A) moulded 3 pole straight 250V 10A connector approved to IEC EN60320. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• IEC C13 to IEC C14 Jumper Cord
• Class I Powercord
• IEC C14 Male coupler approved to IEC 60320-2-2
• 2P+E -250V
• IEC C13 connector approved to IEC 320
• 2m
• H05VV-F 3x0.75mm
• Black
• RoHs compliant

• 9V Battery
• Alkaline

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack. The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14, C20, or 16A commando options
• Horizontal UK 13A BS1363
• type G
• outlets

Vertical IEC PDUs are widely used to accommodate cabinets where a higher number of IEC sockets are needed, but rackspace is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a 0U profile, allowing the rest of the cabinet to be populated with critical hardware.

• 10A IEC C13 60320(320) sockets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• 3m 1.5mm cable
• 32 Amp Plug

Start and Inter leads are used to connect and power many of our desk products, as they allow total customisation through a choice of lengths. The Start leads are a 13A fused UK plug to a 3 pole female connector, and the Inter leads are male to female 3 pole connector. The Start leads are for powering the units from the mains, whereas the Inter leads are ideal for 'Daisy Chaining' multiple products together from just one 13A socket.

• The GST18 3 pole connectors on the Start and Inter leads incorporate a locking clip, meaning the power lead is secure when plugged into a unit
• Multiple products can be linked together using GST18 couple blocks
• Custom length Start and Inter leads can be made to order, using re-wireable connectors

Start and Inter leads are used to connect and power many of our desk products, as they allow total customisation through a choice of lengths. The Start leads are a 13A fused UK plug to a 3 pole female connector, and the Inter leads are male to female 3 pole connector. The Start leads are for powering the units from the mains, whereas the Inter leads are ideal for 'Daisy Chaining' multiple products together from just one 13A socket.

• The GST18 3 pole connectors on the Start and Inter leads incorporate a locking clip, meaning the power lead is secure when plugged into a unit
• Multiple products can be linked together using GST18 couple blocks
• Custom length Start and Inter leads can be made to order, using re-wireable connectors

Start and Inter leads are used to connect and power many of our desk products, as they allow total customisation through a choice of lengths. The Start leads are a 13A fused UK plug to a 3 pole female connector, and the Inter leads are male to female 3 pole connector. The Start leads are for powering the units from the mains, whereas the Inter leads are ideal for 'Daisy Chaining' multiple products together from just one 13A socket.

• The GST18 3 pole connectors on the Start and Inter leads incorporate a locking clip, meaning the power lead is secure when plugged into a unit
• Multiple products can be linked together using GST18 couple blocks
• Custom length Start and Inter leads can be made to order, using re-wireable connectors

Start and Inter leads are used to connect and power many of our desk products, as they allow total customisation through a choice of lengths. The Start leads are a 13A fused UK plug to a 3 pole female connector, and the Inter leads are male to female 3 pole connector. The Start leads are for powering the units from the mains, whereas the Inter leads are ideal for 'Daisy Chaining' multiple products together from just one 13A socket.

• The GST18 3 pole connectors on the Start and Inter leads incorporate a locking clip, meaning the power lead is secure when plugged into a unit
• Multiple products can be linked together using GST18 couple blocks
• Custom length Start and Inter leads can be made to order, using re-wireable connectors

Male Rewireable GST Connector

• Male
• Rewireable
• GST Connector

Female Rewireable GST Connector

• Female
• Rewireable
• GST Connector

The Power Pack underdesk unit offers an easy solution to the problem of trailing wires on the office floor. The unit can either be mounted underneath a desk with its integral mounting brackets, or can sit in a cable tray. The Power Pack features a 3 pole power input and output, meaning that the units can be daisychained together using PowerData interconnecting leads, to provide more sockets, to more desks from just one power outlet. Alternatively the Power Pack unit can be connected to a PowerData POD S desktop unit, to cover all of your power and data needs.

• PLEASE NOTE - The GST Lead is not included and is sold seperately
• Power Pack - low cost power only option
• Switch options
• Individually fused power sockets
• 2, 3, 4, or 6-port plastic body
• Complies with BS6396: 2008
• Tested to BS1363-2 & BS5733
• Upgradeable – plug a 2-way into a 4-way
• Wieland input/output
• 150mm earth lead to ring terminal
• 'Daisy chain' from one unit to another
• Options for the Power Pack range include master/individual switches, and individual fuses
• The Power Pack's ability to be daisy chained allows for a large combination of power and data sockets
• Custom power lead lengths are achievable by using a PowerData start lead with the Power Pack units (Sold Seperately)

The Power Pack underdesk unit offers an easy solution to the problem of trailing wires on the office floor. The unit can either be mounted underneath a desk with its integral mounting brackets, or can sit in a cable tray. The Power Pack features a 3 pole power input and output, meaning that the units can be daisychained together using PowerData interconnecting leads, to provide more sockets, to more desks from just one power outlet. Alternatively the Power Pack unit can be connected to a PowerData POD S desktop unit, to cover all of your power and data needs.

• PLEASE NOTE - The GST Lead is not included and is sold seperately
• Power Pack - low cost power only option
• Switch options
• Individually fused power sockets
• 2, 3, 4, or 6-port plastic body
• Complies with BS6396: 2008
• Tested to BS1363-2 & BS5733
• Upgradeable – plug a 2-way into a 4-way
• Wieland input/output
• 150mm earth lead to ring terminal
• 'Daisy chain' from one unit to another
• Options for the Power Pack range include master/individual switches, and individual fuses
• The Power Pack's ability to be daisy chained allows for a large combination of power and data sockets
• Custom power lead lengths are achievable by using a PowerData start lead with the Power Pack units (Sold Seperately)

The Power Pack underdesk unit offers an easy solution to the problem of trailing wires on the office floor. The unit can either be mounted underneath a desk with its integral mounting brackets, or can sit in a cable tray. The Power Pack features a 3 pole power input and output, meaning that the units can be daisychained together using PowerData interconnecting leads, to provide more sockets, to more desks from just one power outlet. Alternatively the Power Pack unit can be connected to a PowerData POD S desktop unit, to cover all of your power and data needs.

• PLEASE NOTE - The GST Lead is not included and is sold seperately
• Power Pack - low cost power only option
• Switch options
• Individually fused power sockets
• 2, 3, 4, or 6-port plastic body
• Complies with BS6396: 2008
• Tested to BS1363-2 & BS5733
• Upgradeable – plug a 2-way into a 4-way
• Wieland input/output
• 150mm earth lead to ring terminal
• 'Daisy chain' from one unit to another
• Options for the Power Pack range include master/individual switches, and individual fuses
• The Power Pack's ability to be daisy chained allows for a large combination of power and data sockets
• Custom power lead lengths are achievable by using a PowerData start lead with the Power Pack units (Sold Seperately)

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14, C20, or 16A commando options
• Horizontal UK 13A BS1363 ‘type G’ outlets

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14, C20, or 16A commando options
• Horizontal UK 13A BS1363 ‘type G’ outlets

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14, C20, or 16A commando options
• Horizontal UK 13A BS1363 ‘type G’ outlets

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• C14, C20, or 16A commando options
• 3m 1.5mm cable

Collaborate Versa 150 brings professional audio and video quality to your preferred video and web conferencing applications in huddle spaces and meeting rooms.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• C14, C20, or 16A commando options
• 3m 1.5mm cable

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• C14, C20, or 16A commando options
• 3m 1.5mm cable

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug, however this particular one is fitted with a C14 Plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• This is the C14 Option
• Horizontal UK 13A BS1363 ‘type G’ outlets

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• This is the C14 option
• 3m 1.5mm cable

Horizontal UK PDUs are preferred by many due to the fact that it is commonplace for equipment to be fitted with a UK plug, however this particular one is fitted with a C20 Plug. Horizontal UK PDUs allow users to power essential equipment from one easy location in the rack The cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• 3-metre 1.5mm lead
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• This is the C20 option
• Horizontal UK 13A BS1363 ‘type G’ outlets

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• This is the 16A option
• 3m 1.5mm cable
• 12 Way

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• Vertical UK BS1363 right-angled outlets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• This is the 16A option
• 3m 1.5mm cable
• 16 Way

Horizontal IEC PDUs are a popular unit when it comes to power distribution, as they allow a higher density of power sockets, to distribute power from one easy location in the rack.\nThe cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• Horizontal IEC C13 10A outlets
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14 Plug
• 3-metre 1.5mm lead

Horizontal IEC PDUs are a popular unit when it comes to power distribution, as they allow a higher density of power sockets, to distribute power from one easy location in the rack.\nThe cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• Horizontal IEC C13 10A outlets
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14 Plug
• 3-metre 1.5mm lead

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• 10A IEC C13 60320(320) sockets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• C14 Plug
• 3m 1.5mm cable

Horizontal IEC PDUs are a popular unit when it comes to power distribution, as they allow a higher density of power sockets, to distribute power from one easy location in the rack.\nThe cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• Horizontal IEC C13 10A outlets
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C20 Plug
• 3-metre 1.5mm lead

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• 10A IEC C13 60320(320) sockets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• 16A Commando Plug
• 3m 1.5mm cable

Vertical UK PDUs are widely used to accommodate cabinets where a higher number of UK sockets are needed, but rack space is also at a premium. Being mounted at the back of the cabinet means that the PDU maintains a ‘0U’ profile, allowing the rest of the cabinet to be populated with critical hardware.

• 10A IEC C13 60320(320) sockets
• Tough aluminium extrusion
• Shrouded switch and switch cover
• 32A Commando Plug
• 3m 1.5mm cable

IEC C19 PDUs are commonly found in networking cabinets connecting directly to the targeted equipment. Many products use the C19 as it is an international standard and can deliver a higher output than the IEC C13. Many UPS’s also use the C19 output.

• IEC 320 C19 presentation
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C20 Plug

IEC C19 PDUs are commonly found in networking cabinets connecting directly to the targeted equipment. Many products use the C19 as it is an international standard and can deliver a higher output than the IEC C13. Many UPS’s also use the C19 output.

• IEC 320 C19 presentation
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C20 Plug

IEC C19 PDUs are commonly found in networking cabinets connecting directly to the targeted equipment. Many products use the C19 as it is an international standard and can deliver a higher output than the IEC C13. Many UPS’s also use the C19 output.

• IEC 320 C19 presentation
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• 16A Commando Plug

IEC C19 PDUs are commonly found in networking cabinets connecting directly to the targeted equipment. Many products use the C19 as it is an international standard and can deliver a higher output than the IEC C13. Many UPS’s also use the C19 output.

• Mixed IEC C13 sockets and IEC C19 sockets
• Tough aluminium extrusion
• Neon power indicator
• 16A commando Plug
• Flexible 3 metre 16A and 32A cable feed

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 2 x Power
• 2 x USB
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 2 x Power
• 2 x USB
• 2 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• 2 x USB
• 4 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 6 x Power
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 2 x Power
• 2 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• 2 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• 4 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 6 x Power
• 2 x Cat6
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• 2 x USB
• 4 x 6c Cut Outs
• PLEASE NOTE - The GST Lead is not included and is sold seperately

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 2 x Power
• 4 x 6c Cut Outs
• PLEASE NOTE - The GST Lead is not included and is sold seperately

AV and data assemblies, with faceplates in both 6C and Euro cut-out sizes\n\nMultimedia launch leads are 300mm long giving the opportunity of multi length lead options.

• VGA Lead
• 300mm Lead Length

AV and data assemblies, with faceplates in both 6C and Euro cut-out sizes\n\nMultimedia launch leads are 300mm long giving the opportunity of multi length lead options.

• USB Lead
• 300mm Lead Length

1m Black UK 5 Amp to IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC C13 (EL 701A) moulded 3 pole straight 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC C13 connector approved to IEC320
• 1m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

2m Black UK 5 Amp to IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC C13 (EL 701A) moulded 3 pole straight 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC C13 connector approved to IEC320
• 2m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

3m Black UK 5 Amp to IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC C13 (EL 701A) moulded 3 pole straight 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC C13 connector approved to IEC320
• 3m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

5m Black UK 5 Amp to IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC C13 (EL 701A) moulded 3 pole straight 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC C13 connector approved to IEC320
• 5m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

A 2m Black UK 5 Amp to R/A IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC R/A C13 (EL 702) moulded 3 pole right angle 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to R/A IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC R/A C13 connector approved to IEC320
• 2m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

A 3m Black UK 5 Amp to R/A IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC R/A C13 (EL 702) moulded 3 pole right angle 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to R/A IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC R/A C13 connector approved to IEC320
• 3m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

A 5m Black UK 5 Amp to R/A IEC C13 connector powercord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercords has a fuse rating of 5A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and an IEC R/A C13 (EL 702) moulded 3 pole right angle 250V 10A female connector approved to IEC EN60320 at the other. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• UK 5 Amp to R/A IEC C13 Connector
• Class I powercord
• UK 5amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC R/A C13 connector approved to IEC320
• 5m
• H05VV-F 3X0.75MM
• Black
• ROHS compliant

A 0.5m Black IEC C13 to C14 jumper cord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the jumper cord has a rating of 5A and is fully standards compliant (IEC 60320-2-2,UL,CSA,VDE,KEMA,DEMKO,NEMKO,SEMKO,OVE,IMQ,CEBEC, FINLAND, FRANCE, PSE, SAA, CE). \nThe extension lead is fitted with a male IEC C14 (EL705) moulded 3 pole straight 250V 10A connector, approved to IEC EN60320 and a female IEC C13 (EL-701A) moulded 3 pole straight 250V 10A connector approved to IEC EN60320. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• IEC C13 to IEC C14 Jumper Cord
• Class I Powercord
• IEC C14 Male coupler approved to IEC 60320-2-2
• 2P+E -250V
• IEC C13 connector approved to IEC 320
• 0.5m
• H05VV-F 3x0.75mm
• Black
• RoHs compliant

A 1m Black IEC C13 to C14 jumper cord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the jumper cord has a rating of 5A and is fully standards compliant (IEC 60320-2-2,UL,CSA,VDE,KEMA,DEMKO,NEMKO,SEMKO,OVE,IMQ,CEBEC, FINLAND, FRANCE, PSE, SAA, CE). \nThe extension lead is fitted with a male IEC C14 (EL705) moulded 3 pole straight 250V 10A connector, approved to IEC EN60320 and a female IEC C13 (EL-701A) moulded 3 pole straight 250V 10A connector approved to IEC EN60320. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• IEC C13 to IEC C14 Jumper Cord
• Class I Powercord
• IEC C14 Male coupler approved to IEC 60320-2-2
• 2P+E -250V
• IEC C13 connector approved to IEC 320
• 1m
• H05VV-F 3x0.75mm
• Black
• RoHs compliant

A 3m Black IEC C13 to C14 jumper cord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the jumper cord has a rating of 5A and is fully standards compliant (IEC 60320-2-2,UL,CSA,VDE,KEMA,DEMKO,NEMKO,SEMKO,OVE,IMQ,CEBEC, FINLAND, FRANCE, PSE, SAA, CE). \nThe extension lead is fitted with a male IEC C14 (EL705) moulded 3 pole straight 250V 10A connector, approved to IEC EN60320 and a female IEC C13 (EL-701A) moulded 3 pole straight 250V 10A connector approved to IEC EN60320. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• IEC C13 to IEC C14 Jumper Cord
• Class I Powercord
• IEC C14 Male coupler approved to IEC 60320-2-2
• 2P+E -250V
• IEC C13 connector approved to IEC 320
• 3m
• H05VV-F 3x0.75mm
• Black
• RoHs compliant

A 5m Black IEC C13 to C14 jumper cord manufactured using H05VV-F type cable. \nThe Black cable has 3 x 0.75mm2 conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the jumper cord has a rating of 5A and is fully standards compliant (IEC 60320-2-2,UL,CSA,VDE,KEMA,DEMKO,NEMKO,SEMKO,OVE,IMQ,CEBEC, FINLAND, FRANCE, PSE, SAA, CE). \nThe extension lead is fitted with a male IEC C14 (EL705) moulded 3 pole straight 250V 10A connector, approved to IEC EN60320 and a female IEC C13 (EL-701A) moulded 3 pole straight 250V 10A connector approved to IEC EN60320. As well as holding a comprehensive stock of UK, European and international powercords and accessories, we also have the ability to manufacture bespoke cordsets to your specific requirements. \nPlease contact us to discuss any specialist requirements.

• IEC C13 to IEC C14 Jumper Cord
• Class I Powercord
• IEC C14 Male coupler approved to IEC 60320-2-2
• 2P+E -250V
• IEC C13 connector approved to IEC 320
• 5m
• H05VV-F 3x0.75mm
• Black
• RoHs compliant

This is an IEC C14 (EL 705) is a moulded 3 pole straight 250V 10A male connector, approved to IEC EN60320 to 2 x IEC C13 connectors (EL-701A) Y lead using H05VV-F 3x1.00mm cable 2.5m overall length black.

• IEC C14 to 2 x IEC C13 Connector
• Class I powercord
• 2P+E -250V
• IEC C13 connector approved to IEC320
• IEC C13 connector approved to IEC320
• 2.5m
• H05VV-F 3X1.00MM
• Black
• ROHS compliant

This is a 2.5m Black UK 13 Amp to IEC C19 connector powercords manufactured using H05VV-F type cable. \nThe Black cable has 3 x 1.5mm(squared) conductors (Brown(L),Blue(N),Green/Yellow(E)) and is configured as 2P+E. \nRated for 250V operation the powercord has a fuse rating of 13A and is fully standards compliant. \nThe powercord is terminated with a 3 pin moulded 250V fused UK plug (ref EL 210A), approved by BSI to BS1363/A at one end and a female IEC C19 (EL-711) moulded 3 pole straight 250V 16A connector approved to IEC EN60320.at the other. \nPlease contact us to discuss any specialist requirements.

• UK 13 Amp to IEC C19 Connector
• Class I powercord
• UK 13amp moulded plug approved to BS1363/A
• 2P+E -250V
• IEC C19 connector approved to IEC320
• 2.5m
• H05VV-F 3X1.50MM
• Black
• ROHS compliant

IEC C13 re-wireable, black, female connector

• IEC C13
• Re-wireable
• Black
• Female Connector

IEC C14 re-wireable, black, male connector

• IEC C14
• Re-wireable
• Black
• Male connector

IEC C19 re-wireable socket, black, 16 amp, IEC 60320, female connector

• IEC C19
• Re-wireable socket
• Black
• 16 amp
• IEC 60320
• Female connector

IEC C20 re-wireable plug, black, 16 amp

• IEC C20
• Re-wireable plug
• Black
• 16 amp

In areas of mass power usage such as data centres and comms rooms, 32A power feeds are often utilised. 32A PDUs are an upgraded version of the product designed for up to 16A, using 4mm cable externally and 2.5mm internally wired as a 'ring'. The 32A PDUs can handle double the power input of the standard PDU.

• Vertical
• 8 way
• UK PDU
• With 32A commando plug

C14 - C5 2m Powerlead

• 2m
• C14 one end
• C5 one end
• Used with Mains Power

4 Way Splitter To Provide Multi Output From Single Inline Psu

• Output Voltage 12VDC CCTV Power Supply
• Output Current 5A (5 amps)
• 240v UK 3-Pin Mains Lead included

12v Single Output 2a IP66 Rated Psu

• Input AC100-240V,50/60Hz, rated 3Amp main fuse
• Current Consumption: 24W
• Output current:1 x 2A/output
• Output voltage: DC12V

The Power Pack Desktop utilises an ergonomic modern shape which has been designed to blend in seamlessly with other desktop items such as telephones, monitors, keyboards and laptops etc. Twin powered 5V 1A USB sockets add to the versatility at the desktop. Power and Data to the desktop are not uncommon, 6C data cut-outs allow the installer to complete a buildings structured cabling system to the desktop, and the 6C launch leads give additional AV options such as HDMI, VGA, 3.5mm jack and USB as well as Cat 6 data couplers, 3 and 5-metre data assemblies\nManufactured from a tough ABS plastic extrusion, the same key components from the established and reliable P-Pack under desk product range are used on the desktop to maximise the system performance.

• Desktop Unit
• 4 x Power
• 2 x USB
• PLEASE NOTE - The GST Lead is not included and is sold seperately

12Vdc 16Ch Rack Mount PSU 16 Amp PTC Fused 1U

• Input AC200V-240V,50/60Hz, rated 3Amp main fuse
• Output current: 16Amp
• Output voltage: 12VDC x 16outputs
• Voltage & current output LCD

Horizontal IEC PDUs are a popular unit when it comes to power distribution, as they allow a higher density of power sockets, to distribute power from one easy location in the rack.\nThe cable exits the unit at the rear, making mounting of the PDU easier, whilst taking up only 1.5U of vital rack space

• Horizontal IEC C13 10A outlets
• Tough 1.5U aluminium extrusion
• Shrouded switch with switch cover
• C14, C20, or 16A options
• 3-metre 1.5mm lead