Peripherals

The DAC-CX10 cable is a cost-effective interlink cable between switches, routers, servers and storage devices and supports speeds up to 10Gb/s. DrayTek DAC-CX10 SFP cables connect directly to the SFP module port of the devices, such as any DrayTek switch or router which has an SFP or SFP+ port.\nA Direct Attach Cable or DAC connects SFP module ports on two devices similarly to an RJ-45 network cable, instead of using SFP to optical fiber transceivers, or SFP to RJ-45 transceivers. This significantly simplifies the connection process and reduces cost, while still ensuring reliable operation. For instance, if both devices support 10 Gigabit transfer rates through SFP+, instead of using two SFP+ Fiber transceivers and optical fiber, simply connect the DAC-CX10-01M cable between the two for an up to 10Gb/s link. The DAC-CX10 is one piece - there are no removable RJ-45 or fiber cables to be concerned with.\nThe DAC-CX10 supports up to 10Gb/s - limited according to the speed supported by the connected devices; for example if one device only supports 1Gb/s, that is the maximum link speed available. If you are connecting between two devices whose SFP ports support 10Gb/s, the bandwidth is significantly higher than if you were to use the regular RJ-45 Ethernet/CAT6 ports - such speed is particularly important in high volume applications such as server or storage device to switch/network.\nIf both connected devices support 'port trunking' you can use two DAC-CX10 cables to increase bandwidth even further, but equally, even on a 1Gb/s SFP port, these cables can be useful to make use of all ports without tying up an RJ-45 port that you need for other purposes.\nThe DAC-CX10 module locks securely into place when fitted into a switch to avoid unintended removal and removed by pulling the tab to unlock it from the SFP module slot.

• DrayTek DAC-CX10
• SFP & SFP+ Direct Attach Cable
• Self-Locking on insertion for reliable installation
• Pull-Tab for easy removal
• Ideal for high bandwidth applications (e.g. server to switch)
• Type: 10GBase-CX direct attach cable
• Technology: Twinaxial
• Length: 1 m
• Connector: SFP+ - locking
• Connector (Second End): SFP+ - locking

Draytek DAC-CX10 - 10GBase direct attach cable - SFP/SFP+ (M) locking to SFP/SFP+ (M) locking - 3 m - SFF-8431/SFF-8432

• DrayTek DAC-CX10
• SFP & SFP+ Direct Attach cable
• Self-Locking on insertion for reliable installation
• Pull-Tab for easy removal
• 1GbE & 10GbE capable
• Ideal for high bandwith applications (e.g. server to switch)

Draytek CAB-LTEA5 - Antenna cable - SMA (M) to N connector (M) - 5 m - RG-58A/U

• Type: Antenna cable - RG-58A/U
• Length: 5 m
• Connector: SMA - male
• Connector (Second End): N connector - male

This product is a magnetic base and extension cable compatible with the LTE antennae included with DrayTek Vigor routers that integrate an LTE modem, such as the Vigor 2620Ln.\nThis allows your aerials to be positioned to avoid any obstructions or enclosures which are obscuring the router. Adjust the LTE antennas into the optimum location / direction to increase signal strength and throughput.\nThis is especially useful if the router is installed in a rack inside a comms cabinet because if the aerials are inside the cabinet their signal will be severely impeded. The 1M extension cable allows the aerials to be positioned outside of the cabinet and the magnetic base means that it can be attached to the side of a cabinet if the metal is magnetic.\nThe magnetic antenna bases are supplied in pairs, purchase a single set to extend the antenna positions for both of the router's antennae. The antenna is not included - that is supplied with your 4G/LTE rouiter.\nThe LTE antenna aerials supplied with DrayTek LTE modem routers can twist and tilt at their base, which allows for optimum positioning once connected to the ANT-BAS1 base.

• Magnetic base
• 1M Extension cable
• Kit includes 2 extension bases
• Extend 4G LTE aerials away from the router
• Allows aerials to be located in the optimum position
• Compatible with DrayTek Vigor routers with integrated LTE modems
• Suitable for use with all 4G LTE and 3G frequency bands in use in the UK
• Available in black only
• Suitable for indoor use only
• Can be wall mounted (use 3M Command strips, not included)
• Indoor / Outdoor: Indoor
• Package Content: 2 aerial cables (1 m)
• Colour: Black