Peripherals

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. \n\nOther features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometres.

• Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
• Supports auto MDI/MDIX for TX port
• Provides switch configuration of Force /Auto transfer mode for FX port.
• Extends fiber distance up to 15km
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply

TP-Link's TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-Link's routers, switches, media converters to provide high speed and stability.

• Supports WDM Bi-Directional technology, using a single strand of fiber
• Internal +3.3V power supply
• Plug-and-Play

Use the passive PoE adapter TL-POE4824 to simultaneously supply power and transmit data to a passive PoE device. TL-POE4824 offers a convenient wall-mounting brackets to be easily installed on a wall.

• Gigabit network ports
• 48VDC passive PoE injector
• Auto-detect and auto-supply the necessary power required
• Convenient wall-mount kit
• Plug-and-Play, requires no configuration

The TL-MC1400 14-slot rack-mount chassis is specially designed to accommodate 14 TP-Links media converters for central power supply, saving space and power cables. Moreover, to stabilize the performance and extend the lifetime, two cooling fans are installed internally. Together with MC series Gigabit/Fast Ethernet media converters, TL-MC1400 is the ideal solution for your media conversion network.

• 14 bays to house up to 14 media converters
• Standard 19-inch rack-mountable with, 2U height
• Provides hot-swapping of media converters and redundant power supplies
• Two cooling fans (internal) mounted at the rear panel for system cooling
• Media converter power isolation for electrical isolation from each bay
• Offers over-voltage and over-current protections
• Easy and quick replacement of converter and power supply
• Device Type: Modular expansion base
• Form Factor: Rack-mountable - 2U
• Power: AC 120/230 V (50/60 Hz)
• Dimensions (WxDxH): 48.2 cm x 35.8 cm x 8.6 cm
• Weight: 8 kg

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE receiver adapters, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP camera or IP phone, etc.

• IEEE 802.3af compliant
• Delivers power up to 100 meters
• Auto-determine the necessary power requirements
• Plug-and-Play, requires no configuration
• External power adapter supply

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.\nOther features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

• Complies with 802.3u 10/100Base-TX, 100Base-FX standards
• Link fault passthrough and far end fault minimize the loss caused by link failure timely
• Provides switch configuration of half-duplex / full-duplex transfer mode for FX port
• Extends fiber distance up to 20-60km
• Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.\n\nOther features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

• Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
• Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
• Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
• Extend fiber distance up to 2km
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance, attached to the managed/web smart switches. They can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost.

• Support full-duplex
• Plug-and-Play
• LED indicators show the operation state of the fiber module
• Supports Pull-or-Plug with power on switches
• Internal power from switches

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.\nOther features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19'system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers.

• Complies with IEEE 802.3ab and IEEE 802.3z
• Link fault passthrough and far end fault minimize the loss caused by link failure timely
• Provides switch configuration of force /auto transfer mode for FX port
• Extends fiber distance up to 0.5km
• Supports auto MID/MID-X for TX port
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply

The MC220L is a media converter designed to convert 1000Base-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode.\nOther features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers and 10 kilometers when utilizing single-mode fiber.

• Works at 1000Mbps in full-duplex mode for both TX port and FX port
• Supports auto MID/MID-X for TX port
• Link fault pass through and far end fault minimize the loss caused by link failure timely
• Provides switch configuration of force /auto transfer mode for FX port
• FX port support hot-swappable
• Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply
• Complies with IEEE 802.3ab and IEEE 802.3z

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost.

• Single-mode MiniGBIC module
• Applied to T3700G-28TQ, TL-SG5412F/TL-SG5428, TL-SL5428E,TL-SG3210/TL-SG3216/TL-SG3424/TL-SG3424P,TL-SL3428/TL-SL3452, TL-SG2210P/TL-SG2216/TL-SG2424/TL-SG2424P/TL-SG2452, TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 and MC220L