Installation Accessories

Roofing bolts can be used on many DIY projects other than roofing. These double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. Used in many applications other than roofing, when joining products together. Use drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.

• Roofing Bolts & Square Nuts, Zinc Plated, Bag
• Finish: Zinc PlatedSize: M6 x 25mm
• Pack: 200

M6 x 12 Roofing Bolts

• Pack of 200
• Bright Zinc Plated

HDMI Extension cable 0.5m from Titan

• HDMI Cable
• 0.5m in Length
• 4k resolution
• Black

HDMI Extension cable 1m from Titan

• HDMI Cable
• 1m in Length
• 4k resolution
• Black

HDMI Extension cable 2m from Titan

• HDMI Cable
• 2m in Length
• 4k resolution
• Black

HDMI Extension cable 3m from Titan

• HDMI Cable
• 3m in Length
• 4k resolution
• Black

Cables Direct High Speed HDMI with Ethernet Cable - HDMI with Ethernet cable - HDMI (M) to HDMI (M) - 5 m - black

• HDMI Cable
• 5m in Length
• 4k resolution
• Black

Cables Direct - HDMI with Ethernet cable - HDMI (M) to HDMI (M) - 10 m - black

• HDMI Cable
• 10m in Length
• 4k resolution
• Black

HDMI Extension cable 20m from Titan

• HDMI Cable
• 20m in Length
• 4k resolution
• Black

Cables Direct - VGA cable - HD-15 (VGA) (M) to HD-15 (VGA) (M) - 1 m - molded - black

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

2m VGA male to male cable from Titan

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

Cables Direct - VGA cable - HD-15 (VGA) (M) to HD-15 (VGA) (M) - 3 m - thumbscrews - black

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

Cables Direct - VGA cable - HD-15 (VGA) (M) to HD-15 (VGA) (M) - 5 m - molded - black

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

10m VGA male to male cable from Titan

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

15m VGA male to male cable from Titan

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

20m VGA male to male cable from Titan

• Screw-in VGA cable with 15-pin male input and output.
• Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up for high resolution LCD and LED monitors.
• The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection.
• Gold-plated connectors
• 100% bare copper conductors.
• Links VGA-equipped computer to any display with 15-pin VGA port.

• Single
• 27mm

Single White Plastic Back Box

• Single
• 37mm

• Single
• 47mm

Plastic Back Box

• Double
• 146 x 86 x 37mm

Metal Clad Single Facia & Backbox with twin media module aperture

• Metal Clad
• Single Facia
• Includes Backbox
• Twin Media Module Aperture
• Grey

Metal Clad Double Facia & Backbox with quad media module aperture

• Metal Clad
• Double Facia
• Includes Backbox
• Quad Media Module Aperture
• Grey

Metal Clad Single Surface Box 40mm

• Metal Clad
• 1 Gang
• Single
• Surface Mounting Box
• 40mm Deep

Metal Clad Double Surface Box 40mm

• Metal Clad
• 2 Gang
• Double
• Surface Mounting Box
• 40mm Deep

Metal Clad Single Blank Plate

• Single
• 1 Gang
• Blank Plate
• Metal Clad

Metal Clad Double Blank Plate

• Double
• 2 Gang
• Blank Plate
• Metal Clad

Galvanised 25mm Single Gang Back Box

• 1 Gang
• 25mm Deep
• Galvanised Steel
• Knock Out Box

Galvanised 25mm Double Gang Back Box

• 2 Gang
• 25mm Deep
• Galvanised Steel
• Knock Out Box

Galvanised 35mm Single Gang Back Box

• 1 Gang
• 35mm Deep
• Galvanised Steel
• Knock Out Box

Galvanised 35mm Double Gang Back Box

• 2 Gang
• 35mm Deep
• Galvanised Steel
• Knock Out Box

Galvanised 47mm Single Gang Back Box

• 1 Gang
• 47mm Deep
• Galvanised Steel
• Knock Out Box

Galvanised 47mm Double Gang Back Box

• 2 Gang
• 47mm Deep
• Galvanised Steel
• Knock Out Box

Gaffer Tape - 50mm by 50m in Silver - general purpose cloth tape for sealing and protecting

• 50mm x 50m
• Silver Gaffer Tape

Terminal Strips 15amp

• Manufactured from self extinguishing rigid white polypropylene
• CE approved for use in working temperatures up to 85 degree Centigrade
• Terminal Strips
• 15 amp

Terminal Strips 30amp

• Manufactured from self extinguishing rigid white polypropylene
• CE approved for use in working temperatures up to 85 degree Centigrade
• Terminal Strips
• 30 amp

Fixing Band 17mm X 10m Galvanised

• 17mm x 0.7mm
• Black
• 10m
• Configuration 8 Galvanised
• Fixing Band
• TAG

Fixing Band 12mm X 10m Plastic Coated

• 12mm x 0.7mm
• Black
• 10m
• Configuration 8
• Plastic Coated
• Fixing Band
• TAP

Fixing Band 17mm X 10m Plastic Coated

• 17mm x 0.7mm
• Black
• 10m
• Configuration 8
• Plastic Coated
• Fixing Band
• TAP

M3.5mm X 40mm Faceplate Screw 100pk - Chrome

• Define 3.5mm Dia
• 40mm Long Screws
• Bag of 100
• Chrome

M3.5mm X 50mm Faceplate Screw 100pk

• Standard 3.5mm Dia.
• 50mm Long Screws
• Bag 100
• Chrome
• Ideal for Faceplate screws

M3.5mm X 75mm Faceplate Screw 100pk

• Standard 3.5mm Dia.
• 75mm Long Screws
• Bag 100
• Chrome
• Ideal for Faceplate screws

The Forgefix Cavity Wall Anchor Fixing Tool is a specialist fixing gun for specific use when installing cavity wall anchors in to plasterboard. It has a tough metal construction for durability, with an ergonomic grip for comfort and to ease installation. It is ideal for repetitive fixing applications.

• Cavity Wall Anchor Fixing Gun
• Finish: Fixing Tool
• Size:
• Drill:
• Max Thickness:
• Pack: Box 1

These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage.\n\nAll metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

• Cavity Wall Anchors, Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M4 x 32mm
• Drill: 8mm
• Max Thickness: 2-6mm
• Pack: Bag 10

These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage.\n\nAll metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units.\n\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

• Cavity Wall Anchors, Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M4 x 45mm
• Drill: 8mm
• Max Thickness: 5-18mm
• Pack: Bag 10

These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole.\nThe fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required.\nWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.\nEnsure the correct Pozi drive insert bit is used to release fixture and fitting if required.

• Hammer Fixings, Zinc Yellow Passivated Screw, Nylon Plug, Bag
• Size: M8 x 80mm
• Drill Size mm: 8mm
• Max Fixing Thickness: 40mm
• Min Hole Depth mm: 45mm
• Insert Bit: Pozi PZ3
• Pack: Bag 10

Forgefix Roofing bolts can be used on many DIY projects other than roofing. These double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.\nUsed in many applications other than roofing, when joining products together.\nUse drill sizes 1mm larger than bolt diameter.\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.\nWith Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.

• Roofing Bolts & Square Nuts, Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M6 x 12mm
• Pack: Bag 25:

Forgefix Roofing bolts can be used on many DIY projects other than roofing. These double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.\nUsed in many applications other than roofing, when joining products together.\nUse drill sizes 1mm larger than bolt diameter.\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.\nWith Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.

• Roofing Bolts & Square Nuts, Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M6 x 20mm
• Pack: Bag 25:

Forgefix Roofing bolts can be used on many DIY projects other than roofing. These double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.\nUsed in many applications other than roofing, when joining products together.\nUse drill sizes 1mm larger than bolt diameter.\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.\nWith Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.

• Roofing Bolts & Square Nuts, Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M6 x 25mm
• Pack: Bag 25:

Everflex One Hour Caulk / Flexible Decorators Filler is a fast drying flexible decorators filler and sealant which can be overpainted with all paint types, or covered over with wallpaper. No sanding down is required.

• For sealing and filling cracks and gaps prior to decorating.
• For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
• Can be used to fill damage plaster.
• Fast drying - can be overpainted in one hour
• Permanently flexible
• Easy water clean up
• Excellent slump resistance
• Size: 310ml
• Colour: White

These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage.\nAll metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units.\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

• Cavity Wall Anchors
• Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M5 x 52mm
• Pack: Bag 10

All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units.\nZinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

• Cavity Wall Anchors
• Zinc Plated, Bag
• Finish: Zinc Plated
• Size: M5 x 37mm
• Pack: Bag 10

Single Plastic Back Box 32mm

• Single
• 32mm

IP66 Rated External PSU 1 X 4a Outlet

• Support HDMI 1.4b version
• Support 3D video format
• Support high resolution up to 3840X2160/30HZ
• Support highest rate of 3.2 G and TMDS clock can be up to 320MHz
• Support 8/10/12 bit deep colour
• Support AWG26 HDMI standard cable: input up to 15 meters, output up to 25 metres.
• When the resolution is 4K, input up to 12 meters, output up to 15 metres.
• Support one single HDMI source, accessing to multiple HDMI sinks, the source can be a DVD player, A/V receiver or any equipment with HDMI output
• 5V/1A power adapter
• Full Copper Cat5 is to be used at all times to ensure continuityn of HDMI Signal

HDMI Extension cable 15m from Titan

• HDMI Cable
• 15m in Length
• 4k resolution
• Black