In-House Paging

Successor to the best-selling GEO 40A6, the familiar no-nonsense exterior of the A8 hides more than a few secrets. Now with 6 addresses, multiple vibrate patterns, tactile Out of Range and Low Battery alerts,frequency programmable, and with nearly every function selectable using the PC programming interface, the GEO 40A8 is probably the most flexible alphanumeric pager available today.

• Bright 20 Character x 2 line Display
• 6 Addresses (selectable)
• Frequency Programmable
• Lockable Alert Modes
• Pulsed Vibrate Modes
• Urgent Call Alert Mode
• BS5839-1: 2002 compliant

4-zone programmable paging system kit

• Multi-zone programmable on-site paging or telemetry system
• 4 and 8 zone models, fully programmable activation (N/O, N/C or Change of State). Hardware configurable as either voltage or ‘dry’ switched inputs
• Alphanumeric or Numeric messaging, or both on the same system
• Also available on telemetry frequencies (DIGILINK models) to work with the [U]RX10[U] fixed telemetry receivers.
• Mains powered and 12-14VDC input versions available
• Ranges of up to a mile with basic antenna shown
• UHF POCSAG signalling format ensures excellent propagation even in difficult environments
• Optional serial interface kit (EPTPROG) complete with PC menu driven software gives users the ability to program almost every conceivable system parameter
• Standby current of less than 300 Micro Amps, therefore ideal for battery operation
• Adjustable trigger times, delays, alarm repeats, inter-dependent zone operation and 24 hour zones are all programmable options

• Ask your Account Manager for more details.

High quality transmitter modules provides rock-solid RF performance

Scope -

• 3/4 wave fixed antenna: will cover most commercial sites.

Scope GEO85ZAA 4/8 line rechargeable pager, with holster and bungee.

• 8 addresses (individually selectable OFF/TONE/NUMERICAL/ALPHA)
• Synthesized (Frequency programmable)
• High contrast dot matrix LCD
• 8 or 4 line ZOOM display
• Address and frequency hand programmable
• Storage - 60 messages, up to 20,000 characters
• Repeat message rejection
• Low battery, out of range, repeat message, error message unread message indicators
• Vibrate, tone, quiet-tone and mute alert modes
• Urgent call (tone and vibrate).
• Optional protective cover and lens

Replacement Pager Holster Models are availabe for most GEO pager types

• Multi-zone programmable on-site paging or telemetry transmitter
• 5 and 10 zone models, fully programmable activation (N/O, N/C or Change of State). Hardware configurable as either voltage or ‘dry’ switched inputs
• Available on paging frequencies (PageTek models) and on telemetry frequencies (DIGILINK models) to work with the [U]RX10[U] fixed telemetry receivers.
• 12VDC, 24VDC and mains powered versions available
• Programmable pager text messages for each zone and each zone state
• UHF POCSAG signalling format ensures excellent propagation even in difficult environments
• Optional Programming kit available consisting of PC software and USB cable. Enables the installer to configure/re-configure all parameters on site if necessary
• Standby current of less than 300 Micro Amps, therefore ideal for battery operation
• Adjustable trigger times, delays, alarm repeats are all programmable options plus a new 'Burglar Alarm' mode on the 10 zone version.

Scope - Holster bag for pager - grey

• Colour: Grey

The 12-14v DC version of this transmitter is perfectly suited to primary cell or lead acid battery operation as their standby current is below 300 micro amps. A mains powered version (PSCPUHF) is also available, with optional battery backup to cover in the event of mains failure. The transmitter is equipped with 4 volt-free trigger inputs which can be operated in a normally open or normally closed mode. Zone 4 is also able to support a +12 volt trigger. When a zone is triggered, the pager will display the active zone number, together with an identifying beep type or vibrate pattern. The transmitter can be configured to send repeat calls at preset intervals.

Charger to Power Scope 84Z AA

• Suitable for Scope 84Z AA Pager

The 84Z Geo Zoom has 8 lines of big clearly readable text, or if you want, 4 lines of REALLY BIG HIGH VISIBILITY CHARACTERS. For low light conditions, cool blue backlighting further enhances the viewing experience.

• Address & frequency hand programmable (password protected)
• Storage: Repeat message rejection: optional 1,2,5,10 minutes or disabled
• Low Battery indicator
• Out of Range (NO Service) Indicator
• Repeat Message Indicator
• Error Message Indicator
• Unread Message Indicator
• Alert Modes: Vibrate, Tone, Quiet Tone & Mute
• Alert Length: 8, 16, 32 or 64 second programmable
• Urgent Call (Tone + Vibrate)
• Real Time Clock with Alarm

Scope GEON8SEM Front Display Numeric PG

• All functions can be customer programmed at the factory to suit user requirements.
• Power requirements - 1 x AAA battery
• Supplied with battery, holster & safety cord.

Nightstand and charger unit for the rechargeable Scope GEO84ZWM AA pager with on-screen charge status & diagnostics.

• Pillow output - for vibrating pillow pad (sold seperately)
• Power: 240v - plug-in power supply (supplied)
• Pager Battery - AA rechargeable (supplied)

• 4 address, 12 character side display.
• Frequency programmable (synthesized)
• Flexible: all features programmable on/off
• Canned text messages (20 x 6 character)
• Pulsed vibrate modes
• Urgent Call tone + vibrate feature
• Special No service indicator
• Lockable Vibrate and Power On modes
• Disabled switch off

The Scope MPA personal pendant is just as suitable for Healthcare Workers as it is for elderly and vunerable patients. It can form part of a sophisticated integrated system by transmitting to our fixed multi-zone receiver. This can then be integrated with OEM equipment, or used in conjunction with our Connexions range of products. For simple plug-and-play applications, just signal directly to any of our portable or wall-mounted range of pagers\nThe ergonomic design of the case makes it extremely easy to use, even by people with arthritic hands and other disabilities. As well as by the push button, an emergency alarm can also be raised by disconnecting the neck cord.\nThe MPA has been designed to Scope’s usual high standard and is rugged and waterproof to cope with the most challenging environments

• The Scope MPA personal pendant is just as suitable for Healthcare Workers as it is for elderly and vulnerable patients
• An alarm call is triggered by pushing the button or disconnecting the neck-cord
• Signals directly to our portable or wall mounted pagers for simple plug-and-play applications
• Can also signal to our fixed multi-zone receivers for integration with third party systems
• The ergonomically designed case ensures the unit is easy to operate even by people with arthritic hands and other disabilities
• Designed to Scope's usual high standard and is rugged and waterproof to cope with the most challenging environments
• Frequency can be programmed from 433MHz to 460 MHz (subject to licensing constraints of individual countries)
• USB programming module with PC software is available
• Test call function
• 2-axis accelerometer for shock and tilt alarm

The FDANT is a well designed and constructed half wave folded dipole aerial with BALUN matching for use with all SCOPE UHF paging systems. It is capable of providing excellent coverage of very large sites provided it is sited and installed correctly

The 12-14v DC version of this transmitter is perfectly suited to primary cell or lead acid battery operation as their standby current is below 300 micro amps.\n\nA mains powered version (PSCPUHF) is also available, with optional battery backup to cover in the event of mains failure.\n\nThe transmitter is equipped with 4 volt-free trigger inputs which can be operated in a normally open or normally closed mode. Zone 4 is also able to support a +12 volt trigger. When a zone is triggered, the pager will display the active zone number, together with an identifying beep type or vibrate pattern. The transmitter can be configured to send repeat calls at preset intervals.

• Budget 4 Zone UHF Transmitter
• Numeric and Tone/Vibrate Paging
• Mains powered or DC models
• Ranges of up to 1 mile
• Ready-to-Go Kit complete with
• Numeric Pager and Aerial

• Multi-zone programmable on-site paging or telemetry system
• 4 and 8 zone models, fully programmable activation (N/O, N/C or Change of State). Hardware configurable as either voltage or ‘dry’ switched input
• Alphanumeric or Numeric messaging, or both on the same system
• Also available on telemetry frequencies (DIGILINK models) to work with the [U]RX10[U] fixed telemetry receivers.
• Mains powered and 12-14VDC input versions available
• Ranges of up to a mile with basic antenna shown
• UHF POCSAG signalling format ensures excellent propagation even in difficult environments
• Optional serial interface kit (EPTPROG) complete with PC menu driven software gives users the ability to program almost every conceivable system parameter
• Standby current of less than 300 Micro Amps, therefore ideal for battery operation
• Adjustable trigger times, delays, alarm repeats, inter-dependent zone operation and 24 hour zones are all programmable options

Scope Programming Kit - Box pack - with programming cable

• Category: Online & appliance based services - appliance software
• Bundled with: Programming cable
• Licence Qty: 1 licence

Scope Programming Kit - Box pack - with programming cable

• Category: Online & appliance based services - appliance software
• Bundled with: Programming cable
• Licence Qty: 1 licence

This 12vdc powered transmitter is ideally suited to large multizone systems that require alphanumeric pagers. It has a serial input for interfacing to the IM16DC to enable up to 64 zones inputs to be paged

This interface is designed to capture a wide range of data from a variety of different sources. 16 inputs are available as standard with the ability to expand up to 64 inputs using additional DCM16 input cards. Inputs are available for either open or closed circuit connection. Ideal for security, fire and safety equipment and also for general industrial monitoring.

This interface is designed to capture a wide range of data from a variety of different sources. 16 inputs are available as standard with the ability to expand up to 64 inputs using additional DCM16 input cards. Inputs are available for either open or closed circuit connection. Ideal for security, fire and safety equipment and also for general industrial monitoring.

Scope Connex Page - Win

• Platform: Windows

Scope Connex Page -

• Send messages directly from your PC with Scope Connex Page software package
• Interface to a [U]Connexions transmitter[U] via RS232 serial for stand-alone systems or Ethernet for full network paging
• Send messages to multiple [U]Connexions [U]transmitters using your LAN or VPN
• Each pager can access up to four transmitters simultaneously
• An unlimited number of pagers and transmitters can be configured
• Forward email messages directly to your pager when you are away from your desk
• Advanced scheduling functions
• No software or hardware need be installed on your server
• Transmitters with Ethernet interfaces are accessed via their own IP addresses
• Type 'live' messages or select text from a user-defined list.
• Set up your own pager groups
• Multiple user configurations with password access

Scope -

• Safety Neck Strap
• (other straps available)