1. Terms & Conds
  2. Contact Us
discountcomms
  1. Terms & Conds
  2. Contact Us
  3. Login


WIRELESS

DrayTek Vigor 2762VAC AC Wifi Twin VoIP V2762VAC-K


The Vigor 2762Vac features the same specification as the standard Vigor 2762 series router models, with the addition of two phone ports for VoIP services.\n\nStandard Analogue telephone handsets or DECT phone bases can be connected to the Phone 1/2 ports and each of the phones can then be used to make and receive calls using VoIP services (over the Internet) as opposed to using your traditional landline. The two phone ports are independent so you can make two calls at once. It's like having two extra phone lines, but without the monthly rental of additional land-lines.\n\nVoIP calls are typically much lower cost that fixed-line calls, or if you're calling another VoIP user (who is also using the same VoIP provider, or SIP compatible) the calls are free. There are many SIP VoIP providers who can provide pay-as-you-go or monthly calling plans, such as DrayTEL. You can also have your VoIP accounts registered in more than one location so that the phone rings at home or work, and providers can also provide geographic (or non-geographic) phone numbers for incoming calls. Click on the VoIP Features tab for more detail.A

  • Two 'FXS' Phone Ports
  • Hotline Facility (Dial preset number when handset lifted)
  • Digit-Map facility for LCR selection
  • Protocols: SIP, RTP / RTCP
  • 12 SIP Registrar Accounts (for up to 12 VoIP providers/Trunks)
  • Compatible as remote extensions on DrayTek IP PBXs
  • G.168 Line Echo-cancellation
  • Automatic Gain Control
  • Jitter Buffer ( 125ms )
  • Voice Codecs:G.711 A / µ Law
  • G.723.1
  • G.726
  • G.729 A / B
  • VAD / CNG
  • Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
  • DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
  • FAX / Modem Support G.711 Pass-through
  • T.38 for FAX
  • Supplemental Services (Dependent on ITSP):Caller ID
  • Call Hold / Retrieve
  • Call Waiting
  • Call Waiting with Caller ID
  • Call Transfer
  • Call Forwarding ( Always , On Busy and On No Answer )
  • DND (Do not Disturb)
  • Call Barring ( Incoming / Outgoing )
  • MWI ( Message Waiting Indicator ) ( RFC-3842 )

DrayTek Vigor 2762VAC AC Wifi Twin VoIP V2762VAC-K

162.07 (Ex VAT)


OUT OF STOCK


DrayTek VigorAP 903 Access Point VAP903-K


DrayTek VigorAP 903 is a wireless access point with a 5-port switch for expanding the network wirelessly. LAN clients can join the network from one of the 5 Gigabit ports or the wireless connection. It is designed to provide a smooth wireless connection by supporting 802.11ac wave2 standard and providing advanced features, such as AirTime Fairness, Band Steering, and AP-Assisted Roaming.

  • Concurrent dual band
  • Support 2x2 11ac WAVE2
  • Data rate up to 867Mbps in 5GHz and up to 400Mbps in 2.4GHz
  • 5 GbE port (including 1 PoE) + 1 USB Port
  • Plug-n-Play Meshing
  • Airtime Fairness
  • Band Steering
  • AP-Assisted Roaming
  • Built-in RADIUS server for 802.1x authentication
  • Compliant with Central AP Management of Vigor Router and VigorACS

DrayTek VigorAP 903 Access Point VAP903-K

132.00 (Ex VAT)




DrayTek Vigor AP 802 Mesh Access Point vap802-k


Mesh Wireless links VigorAP access points across both Wi-Fi and Wired links to cover a large area with a single Wireless network, spanning multiple Wireless Access Points and easily managed from the Mesh Root VigorAP or with the DrayTek Wireless app.\nThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2862 and additional VigorAPs join up as Mesh Nodes, which connect wirelessly to the Mesh Root.\nYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh, instead of a distant Wi-Fi network with low signal. Internet connectivity relays through the Mesh, using the up to 866Mbps 5GHz wireless as the backhaul link, to relay between Mesh Nodes and avoid long waits for downloads.

  • Truly wireless Wi-Fi. Reduces significantly the cost of the network deployment.
  • Quick to install or change configuration
  • Compact and easy to install.
  • Eliminates wireless dead zones. Zero downtime.
  • Connect wired ethernet devices via wireless at high speed, avoiding long cable runs.
  • Improve wireless network efficiency.

DrayTek Vigor AP 802 Mesh Access Point vap802-k

92.40 (Ex VAT)




DRAYTEK VIGORAP 912C ACCESS POINT VAP912C-K


DRAYTEK VIGORAP 912C ACCESS POINT VAP912C-K

142.80 (Ex VAT)




DRAYTEK VIGORAP 918R OUTDOOR AP VAP918R-K


DRAYTEK VIGORAP 918R OUTDOOR AP VAP918R-K

226.80 (Ex VAT)




DRAYTEK VIGORAP 918RPD OUTDOOR AP VAP918RPD-K


DRAYTEK VIGORAP 918RPD OUTDOOR AP VAP918RPD-K

262.80 (Ex VAT)




DRAYTEK 920RPD ANTENNA (PAIR) 920RPD ANTENNA


DRAYTEK 920RPD ANTENNA (PAIR) 920RPD ANTENNA

26.95 (Ex VAT)




DRAYTEK OUTDOOR LTE/4G/5G ANTENNA ANT-4GE1-K


DRAYTEK OUTDOOR LTE/4G/5G ANTENNA ANT-4GE1-K

47.72 (Ex VAT)




DRAYTEK VIGORAP 1000C ACCESS POINT VAP1000C-K


DRAYTEK VIGORAP 1000C ACCESS POINT VAP1000C-K

193.20 (Ex VAT)




DrayTek Ap710 Wireless Access Point AP710-K


The VigorAP 710 is a Wireless Access Point and it provides the ultimate industry standard access to corporate network, the Internet, e-mail and residential wireless network. With mobile workforce demands, VigorAP 710 delivers reliable and secure wireless local area networks (WLANs). The extended range is enabled through its simplified but robust management and configuration.

  • Affordable IEEE802.11n /2.4GHz WLAN access point
  • Multiple SSID (Up to 4 SSID) for guest wireless access to the Internet
  • Built-in RADIUS Server for the security enhancement of your wireless network
  • WDS (Wireless Distribution System) easily extending your network through Point-to-Point /Multi-Point Bridge and Universal Repeater Mode.

DrayTek Ap710 Wireless Access Point AP710-K

69.60 (Ex VAT)




DrayTek Ant1005 5db High Gain Aerial X3 ANT1005


Vigor routers equipped with Wireless LAN facilities are supplied with the standard 2 or 3dBi gain aerials. A higher gain aerial provides a signal gain which can in many circumstances improve your wireless coverage/range as well as your connection speed at longer ranges, particularly where your required coverage area is currently borderline and needs a 'little extra help'.\n\nUni(single)directional aerials are intended for application where you want the signal in one direction only, either for increased range or for security reasons. By concentrating an aerial in one direction, both transmission strength and receive sensitivity are improved as well as benefits in avoiding interference or traffic from adjacent networks in other directions.\n\nWireless antenna gain is a complex area and we'd recommend seeking out a specialist site for further details but put simply, aerials are designed in such a way that they can increase the signal output from the transmitter's original output.

  • Gain: 5dBi
  • Freq Band: 2.4Ghz
  • Beam: Omni Directional
  • HPBW: 360 deg Horizontal/40 deg Vertical
  • Dimensions: 196mm High
  • Mount: Router
  • Supplied as set of 3
  • For indoor use only

DrayTek Ant1005 5db High Gain Aerial X3 ANT1005

24.00 (Ex VAT)




DrayTek Ant2520 10db High Gain Aerial Db ANT2520


DrayTek ANT-2520 is a Dual-band indoor Directional Patch Antenna. It is used for normal indoor point to point wireless connection application. ANT-2520 is designed to connect with most wireless devices that use detachable antenna with Access Point and Wireless Router. Simply unscrew the existing antenna on your device and connect on DrayTek high gain antenna series and enjoy the benefits of wireless network.

  • High-gain Dual-band Antenna
  • Uni-directional Beam Pattern
  • Improve data throughput at further distances
  • Compatible with 802.11ac/a/b/g/n
  • 7.5 dBi @2.4G / 10 dBi @5G

DrayTek Ant2520 10db High Gain Aerial Db ANT2520

22.50 (Ex VAT)




DrayTek Magnetic Base For Wifi Aerials ANT-BAS1


This product is a magnetic base and extension cable compatible with the ANT-2520, ANT-1207 and ANT-1005 aerials used with any DrayTek router or wireless access point.\n\nThis allows your aerials to be positioned to avoid any obstructions or enclosures which are obscuring the router or wireless access point and find the optimum location.\n\nThis is especially useful if the router is installed in a rack inside a comms cabinet because if the aerials are inside the cabinet their signal will be severely impeded. The 1M extension cable allows the aerials to be positioned outside of the cabinet and the magnetic base means that it can be attached to the side of a cabinet if the metal is magnetic.\n\nThe magnetic antenna base is supplied singly; you can purchase 1, 2 or 3 to suit the number of aerials on your router or access point.\n\nThe antenna base is compatible with dual-band aerials so can be used for both 2.4Ghz and 5Ghz operation. It is also suitable for use with 802.11ac operation (5Ghz).\n\nThe DrayTek ANT-1250, ANT-1207 and ANT-1005 aerials twist and can tilt at their base, which allows for optimum positioning once connected to the ANT-BAS1 base.

  • Magnetic Base
  • 1M Extension Cable
  • Allows aerial to be located in best position
  • Compatible with ANT-1250,1207 and 1005
  • Suitable for all DrayTek routers & access Points
  • Compatible with 802.11a,b,g,n & 802.11ac
  • Dual-Band: 2.4Ghz & 5Ghz
  • Available in black only
  • Suitable for indoor use only

DrayTek Magnetic Base For Wifi Aerials ANT-BAS1

18.00 (Ex VAT)