1. Terms & Conds
  2. Contact Us
discountcomms
  1. Terms & Conds
  2. Contact Us
  3. Login


Scope On-Site Paging and Pagers

Scope GE0N9SN


Manufacturers Part Number:- GE0N9SN DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope  GE0N9SN

94.50 (Ex VAT)




Scope PEN3


Manufacturers Part Number:- PEN3 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope  PEN3

94.08 (Ex VAT)




Scope Battery Back Up Mains Connexions A812E


Manufacturers Part Number:- A812E DESCRIPTION:- Battery backup kit For mains powered transmitters FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Battery  Back  Up  Mains  Connexions A812E

20.21 (Ex VAT)




Scope Chg-8 Charger For 84zaa (Uk Psu) CHGAAUK


Manufacturers Part Number:- CHGAAUK DESCRIPTION:- Charger to Power Scope 84Z AA FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Chg-8 Charger For 84zaa (Uk Psu) CHGAAUK

62.40 (Ex VAT)




Scope Connexions Programming Kit CX9PP


Manufacturers Part Number:- CX9PP DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions  Programming  Kit CX9PP

36.70 (Ex VAT)




Scope Connexions 3 8 Way Dry Con B/o Box DC8


Manufacturers Part Number:- DC8 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 3 8  Way  Dry  Con  B/o  Box DC8

51.32 (Ex VAT)




Scope Eeprom Chip (Issue 7) 27C256


Manufacturers Part Number:- 27C256 DESCRIPTION:- The Microchip Technology Inc. 27C256 is a CMOS 256K bit electrically Programmable Read Only Memory (EPROM). The device is organized as 32K words by 8 bits (32K bytes). Accessing individual bytes from an address transition or from power-up (chip enable pin going low) is accomplished in less than 90 ns. This very high speed device allows the most sophisticated microprocessors to run at full speed without the need for WAIT states. CMOS design and processing enables this part to be used in systems where reduced power consumption and reliability are requirements. A complete family of packages is offered to provide the most flexibility in applications. For surface mount applications, PLCC, SOIC, VSOP or TSOP packaging is available. Tape and reel packaging is also available for PLCC or SOIC packages FEATURES:- Warranty:-

Scope Eeprom  Chip (Issue 7) 27C256

36.02 (Ex VAT)




Scope L/weight C/fed 1/2 Wave Di-pole LUHFDP


Manufacturers Part Number:- LUHFDP DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope L/weight  C/fed 1/2  Wave  Di-pole LUHFDP

36.40 (Ex VAT)




Scope Pager Neck Strap NSCLIP


Manufacturers Part Number:- NSCLIP DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Pager  Neck  Strap NSCLIP

4.54 (Ex VAT)




Scope Programming Charge / Per Message PM


Manufacturers Part Number:- PM DESCRIPTION:- FEATURES:- Warranty:-

Scope Programming  Charge /  Per  Message PM

1.98 (Ex VAT)




Scope Protective Boot 98BOOTD


Manufacturers Part Number:- 98BOOTD DESCRIPTION:- Protective boot for GEO40A8 pagers FEATURES:- Warranty:- 12 Months Replace/Credit from date of purchase provided the warranty has not been invalidated

Scope Protective  Boot 98BOOTD

25.00 (Ex VAT)




Scope Protective Cover 84z Pager 84ZBOOTG


Manufacturers Part Number:- 84ZBOOTG DESCRIPTION:- Protective Cover for Scope Pager FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Protective  Cover 84z  Pager 84ZBOOTG

19.69 (Ex VAT)




Scope Wall Mount Bracket For Fuhfdp FDWM


Manufacturers Part Number:- FDWM DESCRIPTION:- Wall Mount Bracket For folded dipole aerial (FDWM) FEATURES:- Warranty:-

Scope Wall  Mount  Bracket  For  Fuhfdp FDWM

18.32 (Ex VAT)




Scope Wall Mounting Kit DTWKIT


Manufacturers Part Number:- DTWKIT DESCRIPTION:- Wall mounting kit for the Scope Paging Systems FEATURES:- Warranty:-

Scope Wall  Mounting  Kit DTWKIT

14.70 (Ex VAT)




Scope 12 Volt 4 Zone Transmitter & Pager SCPUHFGNR


Manufacturers Part Number:- SCPUHFGNR DESCRIPTION:- The 12-14v DC version of this transmitter is perfectly suited to primary cell or lead acid battery operation as their standby current is below 300 micro amps. A mains powered version (PSCPUHF) is also available, with optional battery backup to cover in the event of mains failure. The transmitter is equipped with 4 volt-free trigger inputs which can be operated in a normally open or normally closed mode. Zone 4 is also able to support a +12 volt trigger. When a zone is triggered, the pager will display the active zone number, together with an identifying beep type or vibrate pattern. The transmitter can be configured to send repeat calls at preset intervals. FEATURES:- Warranty:-

Scope 12  Volt 4  Zone  Transmitter &  Pager SCPUHFGNR

243.73 (Ex VAT)




Scope 16 Way Dry Contact Master IM16DC


Manufacturers Part Number:- IM16DC DESCRIPTION:- VDI Module Master with 1x16 Way Dry Contact Input Card. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope 16  Way  Dry  Contact  Master IM16DC

334.81 (Ex VAT)




Scope 240v 4 Zone Pagetek Tx & Aerial EPT4ACR


Manufacturers Part Number:- EPT4ACR DESCRIPTION:- PageTek 2 Multi-zone programmable paging system FEATURES:- Warranty:-

Scope 240v 4  Zone  Pagetek  Tx &  Aerial EPT4ACR

196.07 (Ex VAT)




SCOPE Scope Charge Nightstand Cnsmuk CNSMUK


Manufacturers Part Number:- CNSMUK DESCRIPTION:- Nightstand and charger unit for the rechargeable Scope GEO84ZWM AA pager with on-screen charge status & diagnostics. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

SCOPE Scope Charge Nightstand Cnsmuk CNSMUK

150.26 (Ex VAT)




Scope Connex Page Ethernet Add User CXPAGEU


Manufacturers Part Number:- CXPAGEU DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connex  Page  Ethernet  Add  User CXPAGEU

67.20 (Ex VAT)




Scope Connex Page Pc Paging S/war S/alo CXPAGES


Manufacturers Part Number:- CXPAGES DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connex  Page  Pc  Paging  S/war  S/alo CXPAGES

119.54 (Ex VAT)




Scope Connex Page Pc Paging S/ware Eth CXPAGENET


Manufacturers Part Number:- CXPAGENET DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connex  Page  Pc  Paging  S/ware  Eth CXPAGENET

121.42 (Ex VAT)




Scope Scope Connexions 4 Repeater 12vdc Pwr REP4DC


Manufacturers Part Number:- REP4DC DESCRIPTION:- Connexions Repeater System: The repeater will receive all the data sent from the MAIN transmitter(s). The RX10 receiver aerial should therefore be installed within the transmission range of the MAIN transmitter(s). The aerial on the Connexions unit should be located for maximum coverage of the area not serviced by the MAIN transmitter(s). FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Scope Connexions 4 Repeater 12vdc Pwr REP4DC

764.21 (Ex VAT)




Scope Connexions 3 Trans + DTMF CX4T


Manufacturers Part Number:- CX4T DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 3  Trans +  DTMF CX4T

748.05 (Ex VAT)




Scope Connexions 3 Trans 12v DC2 X INP CX4DC


Manufacturers Part Number:- CX4DC DESCRIPTION:- This 12vdc powered transmitter is ideally suited to large multizone systems that require alphanumeric pagers. It has a serial input for interfacing to the IM16DC to enable up to 64 zones inputs to be paged FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 3  Trans 12v  DC2  X  INP CX4DC

472.97 (Ex VAT)




Scope Connexions 3 Trans MP ETH I/face CX4E


Manufacturers Part Number:- CX4E DESCRIPTION:- This interface is designed to capture a wide range of data from a variety of different sources. 16 inputs are available as standard with the ability to expand up to 64 inputs using additional DCM16 input cards. Inputs are available for either open or closed circuit connection. Ideal for security, fire and safety equipment and also for general industrial monitoring. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 3  Trans  MP ETH I/face CX4E

693.80 (Ex VAT)




Scope Connexions 4 Trans MP TELE/I face CX4ET


Manufacturers Part Number:- CX4ET DESCRIPTION:- This interface is designed to capture a wide range of data from a variety of different sources. 16 inputs are available as standard with the ability to expand up to 64 inputs using additional DCM16 input cards. Inputs are available for either open or closed circuit connection. Ideal for security, fire and safety equipment and also for general industrial monitoring. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 4  Trans  MP  TELE/I face CX4ET

964.28 (Ex VAT)




Scope Connexions 5 Tx Tel Panel Module CX5MT


Manufacturers Part Number:- CX5MT DESCRIPTION:- The Connexions System has always provided the latest in on-site paging technology at a realistic price. the latest range is no exeption. Now completely re-designed, but retaining the same modular design concept, allowing you to buy the basic unit and add to it as your company s needs change, so the initial outlay is kept to a minimum. Flexibility has always been the key word with the Scope Connexions Systems, now even more so, with newly designed, high performance interfaces enabling even better connectivity than before. They include connection to internal telephone, PC network, RS232, RS485, USB, dry-contacts and voltage triggers. There is also an Internal protocol conversion option, which enables the translation of incoming RS232 data from host hardware into paging data, providing paging from various fire, intruder, nurse call, building management systems etc. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions 5 Tx Tel Panel Module CX5MT

1,175.30 (Ex VAT)




Scope Connexions Cx5 2watt Trans CX5


Manufacturers Part Number:- CX5 DESCRIPTION:- THE CONNEXIONS SYSTEM The Connexions systems features an advanced paging encoder and transmitter with 8 dry-contact inputs, up to three serial ports which can be set to support Scope, ESPA444 and TAP protocols. USB, Ethernet and telephone interface options.other options include VDI expandable dry contact/voltage input module and connex Page PC paging software. CX5 - Two serial Inputs. 2W outputs FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Connexions  Cx5 2watt  Trans CX5

676.20 (Ex VAT)




Scope Conx5 2w Tx Tel 2 Port CX5T


Manufacturers Part Number:- CX5T DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Conx5 2w  Tx  Tel 2  Port CX5T

895.96 (Ex VAT)




Scope Datapage Lite Console/aeriel/psu DPLITEUK


Manufacturers Part Number:- DPLITEUK DESCRIPTION:- The unit is equipped with a 2 line backlit display featuring user friendly prompts to guide the operator through the system. All parameters can be programmed and customised using a discreet password entered via the keyboard. DataPage Lite is a numeric paging unit system which can accommodate up to 9999 pager identities without requiring any expansion or modification. Pagers are equipped with at least 4 identities as standard. This allows them to be called individually, in selected groups, or globally at any time. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Datapage  Lite  Console/aeriel/psu DPLITEUK

240.24 (Ex VAT)




Scope Folded Dipole Aerial FDANT


Manufacturers Part Number:- FDANT DESCRIPTION:- The FDANT is a well designed and constructed half wave folded dipole aerial with BALUN matching for use with all SCOPE UHF paging systems. It is capable of providing excellent coverage of very large sites provided it is sited and installed correctly FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Folded  Dipole  Aerial FDANT

66.16 (Ex VAT)




Scope Scope Folded Dipole Aerial Kit15 FDKIT15


Manufacturers Part Number:- FDKIT15 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Scope Folded Dipole Aerial Kit15 FDKIT15

150.65 (Ex VAT)




Scope Geo Zoom 8/4 Line Text Pager GEO84ZAAM


Manufacturers Part Number:- GEO84ZAAM DESCRIPTION:- The Ultimate Big Screen Pager Scope have taken it s 84Z pager and super-charged it to new heights of performance! Now featuring a rechargeable AA battery, even louder audible alert and intelligent charger/docking station, the 84Z AA adds a whole new dimension to paging. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Geo Zoom 8/4 Line Text Pager GEO84ZAAM

160.99 (Ex VAT)




Scope Scope Geo40a Programmer Only GSL98PROG


Manufacturers Part Number:- GSL98PROG DESCRIPTION:- FEATURES:- Warranty:-

Scope Scope Geo40a Programmer Only GSL98PROG

97.02 (Ex VAT)




Scope Scope Holster Ge084z S1574


Manufacturers Part Number:- S1574 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Scope Holster Ge084z S1574

4.20 (Ex VAT)




Scope Lone Worker Tx Mk3 HHUKLWC/3


Manufacturers Part Number:- HHUKLWC/3 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Lone  Worker  Tx  Mk3 HHUKLWC/3

214.99 (Ex VAT)




Scope Mains Powered Amp AMPACR


Manufacturers Part Number:- AMPACR DESCRIPTION:- In-line Power Supply for DataPage DataTrack and RX4 FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Mains  Powered  Amp AMPACR

214.99 (Ex VAT)




Scope Scope Mpa Pendant Alarm PEN3


Manufacturers Part Number:- PEN3 DESCRIPTION:- FEATURES:- Warranty:- 12 Months Replace/Credit from date of purchase provided the warranty has not been invalidated

Scope Scope Mpa Pendant Alarm PEN3

87.80 (Ex VAT)




Scope N6v Pager Programmer N6VPROG


Manufacturers Part Number:- N6VPROG DESCRIPTION:- Pulser, Vibrate or Numeric Pager FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope N6v  Pager  Programmer N6VPROG

128.99 (Ex VAT)




Scope Scope Pager Stand (Geo12 & Geo14) PRACK1


Manufacturers Part Number:- PRACK1 DESCRIPTION:- FEATURES:- Warranty:-

Scope Scope Pager Stand (Geo12 & Geo14) PRACK1

3.94 (Ex VAT)




Scope Pagetek 12v 4zone Tx & Aerial EPT4DCR


Manufacturers Part Number:- EPT4DCR DESCRIPTION:- 4-zone programmable paging system kit FEATURES:- Warranty:-

Scope Pagetek 12v 4zone  Tx &  Aerial EPT4DCR

148.78 (Ex VAT)




Scope Pagetek 12v 4zone Tx Only SCPUHFTX


Manufacturers Part Number:- SCPUHFTX DESCRIPTION:- 4-zone programmable paging system kit FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Pagetek 12v 4zone  Tx  Only SCPUHFTX

135.87 (Ex VAT)




Scope Pagetek 2 Prog 4 Zone Trans(12vdc) EPT4DCR


Manufacturers Part Number:- EPT4DCR DESCRIPTION:- FEATURES:- Warranty:-

Scope Pagetek 2  Prog 4  Zone  Trans(12vdc) EPT4DCR

148.78 (Ex VAT)




Scope Pagetek 2 Prog 4 Zone Trans(Mains) EPT4ACR


Manufacturers Part Number:- EPT4ACR DESCRIPTION:- FEATURES:- Warranty:-

Scope Pagetek 2  Prog 4  Zone  Trans(Mains) EPT4ACR

196.07 (Ex VAT)




Scope Pagetek 2 Prog 8 Zone Trans(12vdc) EPT8DCR


Manufacturers Part Number:- EPT8DCR DESCRIPTION:- FEATURES:- Warranty:-

Scope Pagetek 2  Prog 8  Zone  Trans(12vdc) EPT8DCR

206.39 (Ex VAT)




Scope Pagetek 2 Prog 8 Zone Trans(Mains) EPT8ACR


Manufacturers Part Number:- EPT8ACR DESCRIPTION:- FEATURES:- Warranty:-

Scope Pagetek 2  Prog 8  Zone  Trans(Mains) EPT8ACR

253.69 (Ex VAT)




Scope Pagetek Mains 4zone Tx Only EPT4AC


Manufacturers Part Number:- EPT4AC DESCRIPTION:- 4-zone programmable paging system kit FEATURES:- Warranty:-

Scope Pagetek  Mains 4zone  Tx  Only EPT4AC

196.07 (Ex VAT)




Scope Pagetek Mains 8zone Tx & Aerial EPT8AC


Manufacturers Part Number:- EPT8AC DESCRIPTION:- 8-zone programmable paging system kit, TX & Aerial FEATURES:- Warranty:-

Scope Pagetek  Mains 8zone  Tx &  Aerial EPT8AC

253.69 (Ex VAT)




Scope Pagetek SCPUHF Paging Kit (Mains) PSCPGNR


Manufacturers Part Number:- PSCPGNR DESCRIPTION:- The 12-14v DC version of this transmitter is perfectly suited to primary cell or lead acid battery operation as their standby current is below 300 micro amps. A mains powered version (PSCPUHF) is also available, with optional battery backup to cover in the event of mains failure. The transmitter is equipped with 4 volt-free trigger inputs which can be operated in a normally open or normally closed mode. Zone 4 is also able to support a +12 volt trigger. When a zone is triggered, the pager will display the active zone number, together with an identifying beep type or vibrate pattern. The transmitter can be configured to send repeat calls at preset intervals. FEATURES:- Warranty:-

Scope Pagetek  SCPUHF Paging  Kit (Mains) PSCPGNR

296.16 (Ex VAT)




Scope Scope Pbib Panic Button Transmitter PBIB


Manufacturers Part Number:- PBIB DESCRIPTION:- Designed for wall or under-desk mounting, the panic transmitter sends a repeating signal when activated until it is reset with a key. The button flashes periodically to indicate that it is in its triggered state. Multiple units can be used on a site, each sending its own unique identifier to the receiving devices, which could be pagers, fixed receivers or a combination of both. UHF SRD radio transmitter with a range of up to approximately 200 metres (dependant on site conditions) Power is provided by a standard 9V battery. FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Scope Pbib Panic Button Transmitter PBIB

107.52 (Ex VAT)


OUT OF STOCK


Scope Programming Kit For Ept Series EPTPROG


Manufacturers Part Number:- EPTPROG DESCRIPTION:- A programming kit for PageTek 2 EPT transmitters. Requires a PC with a spare serial port. FEATURES:- Warranty:-

Scope Programming  Kit  For  Ept  Series EPTPROG

61.10 (Ex VAT)




Scope Programming Kit Geon8s N8SPROG


Manufacturers Part Number:- N8SPROG DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Programming  Kit  Geon8s N8SPROG

113.40 (Ex VAT)




Scope Range Test Kit With Amplifier RTESTA


Manufacturers Part Number:- RTESTA DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Range  Test  Kit  With  Amplifier RTESTA

735.07 (Ex VAT)




Scope Ring Detector Relay TEL


Manufacturers Part Number:- TEL DESCRIPTION:- A telephone ring detector relay for the Connexions 3 Paging system. Requires dry contact interface (DC8 or SDCPROG). FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Ring  Detector Relay TEL

118.27 (Ex VAT)




Scope Scope Usb Programming Kit For Geo84zm 84ZPROG


Manufacturers Part Number:- 84ZPROG DESCRIPTION:- FEATURES:- Warranty:-

Scope Scope Usb Programming Kit For Geo84zm 84ZPROG

98.56 (Ex VAT)




Scope Scope Wave-Track 4 Pager Unit Wt4 WT4


Manufacturers Part Number:- WT4 DESCRIPTION:- FEATURES:- Warranty:- 12 Months repair from date of purchase provided the warranty has not been invalidated

Scope Scope Wave-Track 4 Pager Unit Wt4 WT4

117.60 (Ex VAT)




Scope Datapage Lite MPN:DPLITEUK


Manufacturer Code : DPLITEUK

The unit is equipped with a 2 line backlit display featuring user friendly prompts to guide the operator through the system. All parameters can be programmed and customised using a discreet password entered via the keyboard. DataPage Lite is a numeric paging unit system which can accommodate up to 9999 pager identities without requiring any expansion or modification. Pagers are equipped with at least 4 identities as standard. This allows them to be called individually, in selected groups, or globally at any time.

Features
•Easy to set up & easy to use
•Can call up to 9999 individual pagers
•Reliable & hard wearing
•Compact & stylish desktop unit
•'Over-the-air' pager switch off function
•Supplied with P.S.U. & aerial assembly

Scope Datapage Lite MPN:DPLITEUK

249.95 (Ex VAT)




Scope Geo Zoom 8/4 Line Text Pager Manufacturer Part: GEO84ZAAM


Manufacturer Part: GEO84ZAAM
The Ultimate Big Screen Pager. Scope have taken its 84Z pager and super-charged it to new heights of performance! Now featuring a rechargeable AA battery, even louder audible alert and intelligent charger/docking station, the 84Z AA adds a whole new dimension to paging.
• AA rechargeable battery (NiMh)
• Intelligent charger/docking station
• Address & frequency hand programmable (password protected)
• Storage: Repeat message rejection: optional 1,2,5,10 minutes or disabled
• Low Battery indicator
• Out of Range (NO Service) Indicator
• Repeat Message Indicator
• Error Message Indicator
• Unread Message Indicator
• Alert Modes: Vibrate, Tone, Quiet Tone & Mute
• Alert Length: 8, 16, 32 or 64 second programmable
• Urgent Call (Tone + Vibrate)
• Real Time Clock with Alarm
• User address select/inhibit

Scope Geo Zoom 8/4 Line Text Pager Manufacturer Part: GEO84ZAAM

142.95 (Ex VAT)




Scope GEON8SM Side (Front) Display Numeric Pager Manufacturer Part: GEON8SM


Manufacturer Part:GEON8SM

Like its top display brother the N8T, the side display N8S numeric pager can be feature-programmed to suit all needs. At its simplest, the pager can be configured for just one button operation to avoid user confusion. Frequency and capcodes can also be handprogrammed on the pager (password protected). The pulsed vibrate patterns are ideal for the hard of hearing, and the pager can even be locked to prevent the user changing the alert mode or switching it off.
• Large 12 digit Display
• Frequency Programmable
• Flexible Configuration Options
• Over The Air Commands
• Urgent Call Alert Mode
• Up to 24 pre-stored text messages
• Selectable vibrate patterns

Scope GEON8SM Side (Front) Display Numeric Pager Manufacturer Part: GEON8SM

106.85 (Ex VAT)




Scope GEO14ASU Single Line Alphanumeric Pager Manufacturer Part: GEO14ASU


Manufacturer Part: GEO14ASU
The frequency programmable pager with a large one-line text display. If the message is longer than 14 characters, an auto scroll feature can be used. The scroll speed can be set by the user.
• Power: 1 x AAA alkaline battery
• Large 14 Character Scrolling Display
• Frequency Programmable
• Supplied with battery, holster & safety cord

Scope GEO14ASU Single Line Alphanumeric Pager Manufacturer Part: GEO14ASU

109.95 (Ex VAT)




Scope GEO40A8M Alphanumeric 40 Character Pager Manufacturer Part: GEO40A8M


Scope GEO40A8M Alphanumeric 40 Character Pager Manufacturer Part: GEO40A8M
Successor to the best-selling GEO 40A6, the familiar no-nonsense exterior of the A8 hides more than a few secrets. Now with 6 addresses, multiple vibrate patterns, tactile Out of Range and Low Battery alerts,frequency programmable, and with nearly every function selectable using the PC programming interface, the GEO 40A8 is probably the most flexible alphanumeric pager available today.
• Bright 20 Character x 2 line Display
• 6 Addresses (selectable)
• Frequency Programmable
• Lockable Alert Modes
• Pulsed Vibrate Modes
• Urgent Call Alert Mode
• BS5839-1: 2002 compliant

Scope GEO40A8M Alphanumeric 40 Character Pager Manufacturer Part: GEO40A8M

127.95 (Ex VAT)




Scope GEON8SEM Front Display Numeric Pg


Scope GEON8SEM Front Display Numeric Pager

Features
•All functions can be customer programmed at the factory to suit user requirements.
•Power requirements - 1 x AAA battery
•Supplied with battery, holster & safety cord.

Scope GEON8SEM Front Display Numeric Pg

99.95 (Ex VAT)




Scope N6V Pager Programmer MPN:N6VPROG


Manufacturer Code : N6VPROG

Pulser, Vibrate or Numeric Pager

Features
•4 addresses, large 12 character display, 20 characters per message
•Flexible programming options: most functions can be enabled/disabled to suit application
•Urgent Call: distinctive tone+vibrate
•Safety: can be programmed in Locked On mode to prevent accidental switch off
•4 distinct vibrate patterns (also lockable)
•OTA (over the air) switch off facility
•Single AAA battery
•Dimensions: 58 x 42 x 17mm

Scope N6V Pager Programmer MPN:N6VPROG

139.95 (Ex VAT)




Scope GEO84ZM Pager Programmer MPN:Y072 DC9834199


Manufacturer Code : Y072

Features
•8 addresses (individually selectable OFF/TONE/NUMERICAL/ALPHA)
•Synthesized (Frequency programmable)
•High contrast dot matrix LCD; 8 or 4 line ZOOM display
•Address and frequency hand programmable
•Storage - 60 messages, up to 20,000 characters
•Repeat message rejection
•Low battery, out of range, repeat message, error message unread message indicators
•Vibrate, tone, quiet-tone and mute alert modes
•Urgent call (tone and vibrate).
•Optional protective cover and lens

Scope GEO84ZM Pager Programmer MPN:Y072  DC9834199

112.95 (Ex VAT)




Scope GEO84ZM 4/8 Line Alphanumeric Pager MPN:GEO84ZM DC9826035


Manufacturer Code : GEO84ZM

The 84Z Geo Zoom has 8 lines of big clearly readable text, or if you want, 4 lines of REALLY BIG HIGH VISIBILITY CHARACTERS. For low light conditions, cool blue backlighting further enhances the viewing experience.

Features
•Address & frequency hand programmable (password protected)
•Storage: Repeat message rejection: optional 1,2,5,10 minutes or disabled
•Low Battery indicator
•Out of Range (NO Service) Indicator
•Repeat Message Indicator
•Error Message Indicator
•Unread Message Indicator
•Alert Modes: Vibrate, Tone, Quiet Tone & Mute
•Alert Length: 8, 16, 32 or 64 second programmable
•Urgent Call (Tone + Vibrate)
•Real Time Clock with Alarm

Scope GEO84ZM 4/8 Line Alphanumeric Pager MPN:GEO84ZM DC9826035

126.95 (Ex VAT)




Scope GEO N6V


****DISCONTINUED MODEL****
12-digit numeric pager

Scope GEO N6V

114.95 (Ex VAT)



SCOPE FRONT DISPLAY GEON9SM NUMERIC PG


4 address, 12 character side display.
Frequency programmable (synthesized)
Flexible: all features programmable on/off
Canned text messages (20 x 6 character)
Pulsed vibrate modes
Urgent Call tone + vibrate feature
Special "No service" indicator
Lockable Vibrate and Power On modes
Disabled "switch off"

SCOPE FRONT DISPLAY GEON9SM NUMERIC PG

94.49 (Ex VAT)




Scope GE0 N8T


Top display numeric pager

DISCONTINUED MODEL

Scope GE0 N8T

84.99 (Ex VAT)